5in1 EGR & Turbo Intake Cleaner (ETI) is a unique and very effective high-grade product for cleaning typical contamination and deposits found in the air intake, EGR system and turbo. Oil, resins, lacquer and carbon deposits are easily dissolved in a quick way with a minimum of tinkering.

Properties
- Effectively cleans the Turbo, EGR system, intake, throttle valve and combustion chamber from power robbing deposits and lacquer-like compounds.
- Improves engine performance, fuel economy, engine idling and starting.
- Increase lifetime of sensitive engine components like catalysts and diesel particulate filters.
- Reduces harmful emissions.
- Usage For all gasoline and diesel engines with or without turbochargers.
- Will not harm catalytic converters or diesel particulate filters.
- Follow the instructions carefully or have an automotive repair shop carry out this treatment.

Instructions for use
Sticking EGR valve, intake / throttle valve deposits and combustion chamber cleaning: Dismantle the air intake hose. Remove accessible contamination as much as possible by hand / cloth. Start the engine, make sure it has reached a normal operating temperature and turn it off. Shake the can well before use.

Use the long spray probe to enter the intake / manifold (when necessary open throttle valve), apply the product while slowly pulling back the hose in 5 seconds, assuring the complete intake is sprayed. Let the product settle for 5 minutes. Partially close off the air intake entrance (approx. 75%) to increase air speed and create a better mixing of the product in the airflow. Start the engine and let it run at around 2.000 RPM. Spray the product into the air intake with short bursts (2 seconds). Make sure the RPM is back at 2.000 RPM before applying the next burst. Finish the complete content of the can and keep the engine idling for at least 3 minutes after the treatment before stopping. IMPORTANT during cleaning via the air intake make sure to have a solid item at hand to close off the intake completely should heavy engine knocking occur. In case RPMs drop, accelerate to prevent stalling. In case of engine knocking or stalling stop spraying immediately. Make sure the catalytic converter and diesel particulate filter do not get overheated.

Malfunctioning EGR or turbo with heavy carbon deposits: Shake well before use. Dismantle the parts (Turbo & EGR housing). Spray the product onto the deposits within the EGR housing and
Turbo. Let the product settle for a few minutes and repeat this when required. If needed use a brush or rag to remove any loose deposits. Make sure parts are dry before reassembling them.

Use the amount required and use the rest of the content for cleaning via the air intake as described under procedure A in order to prevent quick repeated build-up of deposits in the EGR system. Dosage The content of one aerosol is sufficient for EGR + Turbo, Intake and Combustion Chamber cleaning. To be used whenever required. ETI should be used regularly on engines sensitive to intake fouling and DPF saturation. To prevent carbon deposit buildup, regular use of 5in1 fuel treatments is highly recommended.