In this category you will find lowering springs. Lower your car easily with these springs. You use the springs not only because it looks good, but also because you greatly improve road holding. We supply lowering springs from all famous brands such as AP, H&R, Eibach, Vogtland, supersport and ST .
Besides lowering springs, we also have Eibach-Lift-Kits. This increase is for a better off-road driving experience.
If you can not find certain lowering springs in our webshop, ask one of our employees.
H&R Height Adjustable Spring System Audi A3 8V Sdn/SB/Cabrio & Seat Leon 5F ST & Skoda Octavia 5E & VW Golf VII Variant (+ 4Motion) 2012- 2WD FA-Load from 1011kg
H&R Height Adjustable Spring System Audi A3 8V Sedan/Sportback/Cabrio & Seat Leon 5F ST & Skoda Octavia 5E Sedan/Kombi & VW Golf VII HB 4WD + Variant/Sportsvan 2012- These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary : Audi A3 (8V) Sedan 2WD 2012-, with Multilink, FA-Load from 1011kg, front axle 30-50mm / rear axle 30-50mm Audi A3 (8V) Sportback 2WD 2012-, with Multilink, FA-Load from 1011kg, front axle 30-50mm / rear axle 30-50mm Audi A3 (8V) Cabrio 2WD, with Multilink, FA-Load from 1011kg, front axle 15-35mm / rear axle 15-35mm Seat Leon (5F) ST 2WD/4WD 2013- incl. FR/Cupra, with Twist-Beam or Multilink, FA-Load from 1011kg, front axle 20-40mm / rear axle 20-40mm Skoda Octavia (5E) Sedan/Kombi 2013- incl. RS, with Twist-Beam or Multilink, FA-Load from 1011kg, front axle 25-45mm / rear axle 25-45mm Volkswagen Golf VII HB 4WD 2012- incl. R, with Multilink, FA-Load from 1011kg, front axle 20-40mm / rear axle 20-40mm Volkswagen Golf VII Variant 2WD/4WD 2012- incl. GTD/R, with Twist-Beam or Multilink, FA-Load from 1011kg, front axle 20-40mm / rear axle 20-40mm Volkswagen Golf Sportsvan 2WD 2014-, with Multilink, FA-Load from 1011kg, front axle 20-40mm / rear axle 20-40mm With and without electronic damping. H&R Height Adjustable Spring System Audi A3 8V Sedan/Sportback/Cabrio & Seat Leon 5F ST & Skoda Octavia 5E Sedan/Kombi & VW Golf VII HB 4WD + Variant/Sportsvan 2012- These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary : Audi A3 (8V) Sedan 2WD 2012-, with Multilink, FA-Load from 1011kg, front axle 30-50mm / rear axle 30-50mm Audi A3 (8V) Sportback 2WD 2012-, with Multilink, FA-Load from 1011kg, front axle 30-50mm / rear axle 30-50mm Audi A3 (8V) Cabrio 2WD, with Multilink, FA-Load from 1011kg, front axle 15-35mm / rear axle 15-35mm Seat Leon (5F) ST 2WD/4WD 2013- incl. FR/Cupra, with Twist-Beam or Multilink, FA-Load from 1011kg, front axle 20-40mm / rear axle 20-40mm Skoda Octavia (5E) Sedan/Kombi 2013- incl. RS, with Twist-Beam or Multilink, FA-Load from 1011kg, front axle 25-45mm / rear axle 25-45mm Volkswagen Golf VII HB 4WD 2012- incl. R, with Multilink, FA-Load from 1011kg, front axle 20-40mm / rear axle 20-40mm Volkswagen Golf VII Variant 2WD/4WD 2012- incl. GTD/R, with Twist-Beam or Multilink, FA-Load from 1011kg, front axle 20-40mm / rear axle 20-40mm Volkswagen Golf Sportsvan 2WD 2014-, with Multilink, FA-Load from 1011kg, front axle 20-40mm / rear axle 20-40mm With and without electronic damping.
H&R Height Adjustable Spring System Audi A3 8V Sdn/SB/Cabrio & Seat Leon 5F ST & Skoda Octavia 5E & VW Golf VII Variant (+ 4Motion) 2012- 2WD FA-Load up to 1010kg
H&R Height Adjustable Spring System Audi A3 8V Sedan/Sportback/Cabrio & Seat Leon 5F ST & Skoda Octavia 5E Sedan/Kombi & VW Golf VII HB 4WD + Variant/Sportsvan 2012-These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function.- Sporty appearance- Lowered center of gravity- Individual lowering on the original adaptive or electronic adjustable shock absorbers- The original damping adjustment of the shocks maintains without limitation- Improved handling characteristics- With approval- No alignment of the original electronic system necessary:Audi A3 (8V) Sedan 2WD 2012-, with Multilink, FA-Load up to 1010kg, front axle 30-50mm / rear axle 30-50mmAudi A3 (8V) Sportback 2WD 2012-, with Multilink, FA-Load up to 1010kg, front axle 30-50mm / rear axle 30-50mmAudi A3 (8V) Cabrio 2WD, with Multilink, FA-Load up to 1010kg, front axle 15-35mm / rear axle 15-35mmSeat Leon (5F) ST 2WD/4WD 2013- incl. FR/Cupra, with Twist-Beam or Multilink, FA-Load up to 1010kg, front axle 20-40mm / rear axle 20-40mmSkoda Octavia (5E) Sedan/Kombi 2013- incl. RS, with Twist-Beam or Multilink, FA-Load up to 1010kg, front axle 25-45mm / rear axle 25-45mmVolkswagen Golf VII HB 4WD 2012- incl. R, with Multilink, FA-Load up to 1010kg, front axle 20-40mm / rear axle 20-40mmVolkswagen Golf VII Variant 2WD/4WD 2012- incl. GTD/R, with Twist-Beam or Multilink, FA-Load up to 1010kg, front axle 20-40mm / rear axle 20-40mmVolkswagen Golf Sportsvan 2WD 2014-, with Multilink, FA-Load up to 1010kg, front axle 20-40mm / rear axle 20-40mmWith and without electronic damping.
H&R Height Adjustable Spring System Audi RS3 (GY) Sedan & Sportback 2021- - FA15-25/RA15-30mm
H&R Height Adjustable Spring System Audi RS3 (GY) Sedan & Sportback 2021- - FA15-25/RA12-30mm These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary : Audi RS3 Sedan & Sportback Type GY, quattro (4WD), 2021-, incl. Adaptive shocks, Front axle15-25mm / Rear axle15-30mm
H&R Height Adjustable Spring System BMW M2 Coupé G87 & M3 G80 Sedan & M4 G82 Coupé 2021- FA15-35/RA5-40mm
H&R Height Adjustable Spring System BMW M2 Coupe G87 & M3 G80 Sedan & M4 G82 Coupe 2021- FA15-35/RA5-40mm These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary BMW M2 G87 2023-, 2WD, only with adaptive M supension, Front axle 25-35mm/ Rear axle 20-35mm BMW M3 G80 Sedan 2021-, 2WD, incl. M3 Competition, only with adaptive M supension, Front axle 25-35mm/ Rear axle 25-40mm BMW M3 CS G80 Sedan 2023-, 4WD, only with adaptive M supension, Front axle 20-30mm/ Rear axle 5-20mm BMW M4 G82 Coupe 2021-, 2WD, incl. M4 Competition, only with adaptive M supension, Front axle 25-35mm/ Rear axle 25-40mm BMW M4 CSL G82 Coupe 2022-, 2WD, only with adaptive M supension, Front axle 15-25mm/ Rear axle 15-30mm
H&R Height Adjustable Spring System BMW M5 (F10) Sedan & M6 (F06) Gran Coupe 2011- incl. Competition FA20-40/RA20-35mm
H&R Height Adjustable Spring System BMW M5 (F10) Sedan & M6 (F06) Gran Coupe 2011- incl. Competition FA40-55/RA30-50mm These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary : BMW M5 (F10) Sedan & M6 (F06) Gran Coupe 2011- incl. Competition Front axle 40-55 / Rear axle 30-50mm
H&R Height Adjustable Spring System Seat Leon 5F HB/SC & VW Golf VII HB/Sportsvan 2012- 2WD FA-Load from 1011kg
H&R Height Adjustable Spring System Seat Leon 5F HB/SC & VW Golf VII HB/Sportsvan 2012- 2WD These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary : Seat Leon HB/SC 2WD 2013- incl. FR/Cupra, with Twist-Beam, FA-Load from 1011kg, front axle 20-40mm / rear axle 20-40mm Volkswagen Golf VII HB 2WD 2012-, with Twist-Beam, FA-Load from 1011kg, front axle 20-40mm / rear axle 20-40mm Volkswagen Golf VII Sportsvan 2WD 2014-, with Twist-Beam, FA-Load from 1011kg, front axle 20-40mm / rear axle 20-40mm With and without electronic damping.
H&R Height Adjustable Spring System Seat Leon 5F HB/SC & VW Golf VII HB/Sportsvan 2012- 2WD FA-Load up to 1010kg
H&R Height Adjustable Spring System Seat Leon 5F HB/SC & VW Golf VII HB/Sportsvan 2012- 2WDThese springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function.- Sporty appearance- Lowered center of gravity- Individual lowering on the original adaptive or electronic adjustable shock absorbers- The original damping adjustment of the shocks maintains without limitation- Improved handling characteristics- With approval- No alignment of the original electronic system necessary:Seat Leon HB/SC 2WD 2013- incl. FR/Cupra, with Twist-Beam, FA-Load up to 1010kg, front axle 20-40mm / rear axle 20-40mmVolkswagen Golf VII HB 2WD 2012-, with Twist-Beam, FA-Load up to 1010kg, front axle 20-40mm / rear axle 20-40mmVolkswagen Golf VII Sportsvan 2WD 2014-, with Twist-Beam, FA-Load up to 1010kg, front axle 20-40mm / rear axle 20-40mmWith and without electronic damping.
H&R Height Adjustable Spring System Volkswagen Caddy V MPV (SK/SKN) SWB/LWB 2020- & Ford Tourneo Connect (SK) 2022- - FA25-35/RA35-45mm (incl. 7-Seater) (2WD)
H&R Height Adjustable Spring System Volkswagen Caddy V MPV (SK/SKN) SWB/LWB 2020- & Ford Tourneo Connect (SK) 2022- - FA25-35/RA35-45mm (incl. 7-Seater) (2WD) These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary : Volkswagen Caddy V Type SK, 2WD, 2020-, incl. 7-Seater, incl. stationwagon, EcoProfi, Life, Style, Panamericana, exkl. California, excl. OE Raised suspension, SWB/LWB, Front axle 25-35mm/Rear axle 35-45mm Ford Tourneo Connect Type SK, 2WD, 2022-, incl. 7-Seater, incl. Active, excl. OE Raised suspension, Front axle 25-35mm/Rear axle 35-45mm
H&R Height Adjustable Spring System Volkswagen Transporter T5/T6/T6.1 FA45/60/RA20-50mm
H&R Height-Adjustable Spring Systems for VW Transporter T5, T6 & T6.1 – Sporty Lowering with OEM Comfort Experience maximum performance and sporty styling with the H&R height-adjustable spring systems – specially developed for the Volkswagen Transporter, Multivan, and California models of the T5, T6, and T6.1 series. These innovative spring systems allow variable lowering while maintaining full compatibility with factory adaptive or electronically adjustable dampers. Advantages of H&R Height-Adjustable Spring Systems Individually adjustable lowering in the range front axle 45–60 mm / rear axle 20–50 mm Sporty appearance and improved road handling Retains full OEM damper functionality – no performance loss Suitable with or without adaptive damping control Compatible with Standard, Dynamic, and Sport suspension setups Not suitable for rough-road suspension Optimized driving dynamics for more precise handling Supplied with TÜV-approved certificate (Teilegutachten) No modification of vehicle electronics required Important Note Depending on engine type, transmission, equipment level, and vehicle tolerances, the actual lowering may vary from the stated values. Compatibility The H&R height-adjustable spring systems are suitable for the following models: Volkswagen Transporter / Multivan / California T5 (7HM, 7HC, HK, 7HKX0, 7J0, 7HMA, 7HCA) Model years: 2003–2015 • 2WD/4WD • incl. Dynamic/Sport suspension • without rough-road suspension Lowering: Front 60 mm / Rear 20–50 mm Volkswagen Transporter / Multivan / Kombi / California / California Beach T6 (7HC, 7HMA, 7J0) Model years: 2015–2020 • 2WD/4WD • incl. Dynamic/Sport suspension • without rough-road suspension Lowering: Front 60 mm / Rear 20–50 mm Volkswagen Transporter / Multivan / Kombi T6.1 (7HC, 7J0) Model years: from 2020 • 2WD/4WD • incl. Dynamic/Sport suspension • without rough-road suspension Lowering: Front 45 mm / Rear 20–50 mm Volkswagen California / California Beach T6.1 (7HMA) Model years: from 2020 • 2WD/4WD • incl. Dynamic/Sport suspension • without rough-road suspension Lowering: Front 60 mm / Rear 30–50 mm Conclusion With the H&R height-adjustable spring systems for the VW Transporter T5, T6, and T6.1, you combine sporty design, precise handling, and maximum ride comfort. Perfect for drivers who want individual lowering without compromising comfort.
H&R Height Adjustable Spring System BMW M3 G80 M4 G82
H&R Height Adjustable Spring System BMW M3 G80 M4 G82 These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary Suitable for: BMW M3 G80 Sedan 2021-, 2WD, incl. M3 Competition, only with adaptive M supension, Front axle 25-35mm/ Rear axle 25-40mm BMW M4 G82 Coupe 2021-, 2WD, incl. M4 Competition, only with adaptive M supension, Front axle 25-35mm/ Rear axle 25-40mm
H&R Liftkit Kia Sorento 06-11 +45mm
Lifting front: 45 mm, lifting rear: 30 mm, production date from: April 26, 2006, type of approval: with TÜV® certificate Only for facelift Only for HA spring plate rubber Ø 150mm
H&R Lowering Springs A3/Golf V Variant/(Cross) Golf V/Jetta V/Altea/Toledo/Skoda Octavia from 1021kg FA-Load 2003- FA30-45mm/RA30-45mm
H&R Lowering Springs A3/Golf V Variant/(Cross) Golf V/Jetta V/Altea/Toledo/Skoda Octavia from 1021kg FA-Load 2003- FA30-45mm/RA30-45mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Audi A3/A3 Sportback/A3 Convertible Type 8P, 2WD, from 1021 Front axle load including Audi Magnetic Ride 2003-Seat Altea including XL Type 5P, from 1021kg Front axle load, with ABE 2004-Seat Toledo Type 5P, from 1021kg Front axle load, with ABE 2004-Skoda Octavia Sedan/Combi, including RS Type 1Z, 2WD, from 1021kg Front axle load, including RS, with ABE 2004-Volkswagen Golf V + Golf Plus including 4-Motion Type 1K, 2/4WD, from 1021kg Front axle load, including DCC, with ABE 2003-Volkswagen Golf V Variant Type 1KM, 2WD, from 1021kg Front axle load, including DCC, with ABE 2007- Front axle 30-35mm/Rear axle 30-35mmVolkswagen Cross Golf V Type 1KP, from 1021kg Front axle load, including DCC, with ABE 2006- Front axle 40-45mm/Rear axle 40-45mmVolkswagen Jetta V Type 1KM, 2WD, from 1021kg Front axle load, with ABE 2003-Front axle 35mm/Rear axle 35mm.
H&R Lowering Springs A3/Golf V Variant/(Cross)/Jetta V/Altea/Toledo/Octavia up to 1020kg FA-Load 2003- FA30-45/RA30-45mm
H&R Lowering Springs A3/Golf V Variant/(Cross)/Jetta V/Altea/Toledo/Octavia up to 1020kg FA-Load 2003- FA30-45/RA30-45mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Audi A3/A3 Sportback/A3 Convertible Type 8P, 2WD, up to 1020 Front axle load including Audi Magnetic Ride 2003-Seat Altea including XL Type 5P, up to 1020kg Front axle load, with ABE 2004-Seat Toledo Type 5P, up to 1020kg Front axle load, with ABE 2004-Skoda Octavia Sedan/Combi, including RS Type 1Z, 2WD, up to 1020kg Front axle load, including RS, with ABE 2004-Volkswagen Golf V + Golf Plus including Golf V 4-Motion Type 1K, 2/4WD, up to 1020kg Front axle load, including DCC, with ABE 2003-Volkswagen Golf V Variant Type 1KM, 2WD, up to 1020kg Front axle load, including DCC, with ABE 2007- Front axle 30-35mm/Rear axle 30-35mmVolkswagen Cross Golf V Type 1KP, up to 1020kg Front axle load, including DCC, with ABE 2006- Front axle 40-45mm/Rear axle 40-45mmVolkswagen Jetta V Type 1KM, 2WD, up to 1020kg Front axle load, with ABE 2003-Front axle 35mm/Rear axle 35mm.
H&R Lowering Springs Alfa Romeo 147 2000-2011 2WD/GT 2004-2011 up to 980kg FA-Load FA35/RA35mm
H&R Lowering Springs Alfa Romeo 147 2000-2011 2WD/GT 2004-2011 up to 980kg FA-Load FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo 147 Type 937, 2WD, up to 980kg Front axle load, 1.6/2.0L, 2000-2011 Front axle 35mm/Rear axle 35mmAlfa Romeo GT (Coupé) Type 937, up to 980kg Front axle load 2004-2011 Front axle 35mm/Rear axle 35mmSpecial notice is to be taken of the min. height of the lighting equipment.
H&R Lowering Springs Alfa Romeo 147 2000-2011 2WD/GT Diesel 2004-2011 from 981kg FA-Load FA35/RA35mm
H&R Lowering Springs Alfa Romeo 147 2000-2011 2WD/GT Diesel 2004-2011 from 981kg FA-Load FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo 147 Type 937, 2WD, from 981kg Front axle load, (including 1.9JTD), 2000-2011 Front axle 35mm/Rear axle 35mmAlfa Romeo GT (Coupé) Diesel Type 937, from 981kg Front axle load 2004-2011 Front axle 35mm/Rear axle 35mmSpecial notice is to be taken of the min. height of the lighting equipment
H&R Lowering Springs Alfa Romeo 155 2WD 4-Cylinder 1992-1997 FA40/RA40mm
H&R Lowering Springs Alfa Romeo 155 2WD 4-Cylinder 1992-1997 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo 155 Type 167, 2WD, 4-Cylinder, (not for S-Version), 1992-1997 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Alfa Romeo 155 2WD 6-Cylinder 1992-1997 FA40/RA40mm
H&R Lowering Springs Alfa Romeo 155 2WD 6-Cylinder 1992-1997 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo 155 Type 167, 2WD, 6-Cylinder, (not for S-Version), 1992-1997 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Alfa Romeo 156 Sedan/Sportwagon 2WD 4-Cylinder up to 184kW 1997-2005 FA30/RA30mm
H&R Lowering Springs Alfa Romeo 156 Sedan/Sportwagon 2WD 4-Cylinder up to 184kW 1997-2005 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo 156 Sedan/Sportwagon Type 932, 2WD, 4-Cylinder, without self-levelling, up to 184kW 1997-2005 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Alfa Romeo 156 Sedan/Sportwagon 2WD 5/6-Cylinder up to 184kW 1997-2005 FA30/RA30mm
H&R Lowering Springs Alfa Romeo 156 Sedan/Sportwagon 2WD 5/6-Cylinder up to 184kW 1997-2005 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo 156 Sedan/Sportwagon including GTA Type 932, 2WD, 5/6-Cylinder and diesel, without self-levelling, up to 184kW 1997-2005 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Alfa Romeo 159 Sedan & Brera 2WD 2.4 LJTD 2005-2012 FA35mm/RA35mm
H&R Lowering Springs Alfa Romeo 159 Sedan & Brera 2WD 2.4 LJTD 2005-2012 FA35mm/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo 159 Sedan Type 939, 2WD, only 2.4LJTD, with ABE 2005-2012 Front axle 35mm/Rear axle 35mmAlfa Romeo Brera Type 939, 2WD, only 2.4LJTD, with ABE 2006-2011 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Alfa Romeo 159 Sedan/Brera V6 2.3L 4WD/Sportwagon 2.4LJTD 2WD 2005-2012 FA35/RA35mm
H&R Lowering Springs Alfa Romeo 159 Sedan/Brera V6 2.3L 4WD/Sportwagon 2.4LJTD 2WD 2005-2012 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo 159 Sedan Type 939, 4WD, 2005-2012Alfa Romeo 159 Sportwagon Type 939, 2WD, only 2.4LJTD, 2006-2012Alfa Romeo Brera Type 939, 4WD, V6 3.2L 2006-2011Front axle 35mm/Rear axle 35mm.
H&R Lowering Springs Alfa Romeo 159 Sedan/Brera/Spider 2/4WD 2005-2012 FA35/RA35mm
H&R Lowering Springs Alfa Romeo 159 Sedan/Brera/Spider 2/4WD 2005-2012 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo 159 Sedan Type 939, 2WD, 1.9JTS/2.2LJTS/1.9LJTD, 2005-2012Alfa Romeo Brera Type 939, 2WD, 1.9LJTS/2.2LJTS/1.9LJTD, 2006-2011Alfa Romeo Spider Type 939, 2/4WD 2006-2011Front axle 35mm/Rear axle 35mm.
H&R Lowering Springs Alfa Romeo 159 SW 2/4WD excl 2.4LJTD 2006-2012 FA35mm/RA35mm
H&R Lowering Springs Alfa Romeo 159 SW 2/4WD excl 2.4LJTD 2006-2012 FA35mm/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo 159 SW Type 939, 2/4WD, exclusive 2.4LJTD, with ABE 2006-2012 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Alfa Romeo 166 2WD 4-Cylinder 1998-2008 FA30/RA30mm
H&R Lowering Springs Alfa Romeo 166 2WD 4-Cylinder 1998-2008 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo 166 Type 936, 2WD, 4-Cylinder 1998-2008 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Alfa Romeo 33 2WD -1993 FA35/RA35mm
H&R Lowering Springs Alfa Romeo 33 2WD -1993 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo 33 Type 907/907A/907B, 2WD, Cylindrical Front axle spring, -1993 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Alfa Romeo 33 Imola 2WD 1993-1994 FA35/RA35mm
H&R Lowering Springs Alfa Romeo 33 Imola 2WD 1993-1994 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo 33 Imola Type 907A/907B, 2WD, Conical Front axle spring, 1993-1994 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Alfa Romeo Giulia 2/4WD 2016-, incl. Facelift 2020/2023- FA30-50/RA30-50mm
H&R Lowering Springs Alfa Romeo Giulia 2/4WD 2016-, incl. Facelift 2020/2023- FA30-50/RA30-50mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo Giulia Type 952 4WD, except Active Suspension, 2016-, incl. Facelift 2020/2023- Front axle 50mm / Rear axle 50mmAlfa Romeo Giulia Type 952 2WD, except Active Suspension, 2016- Front axle 30mm / Rear axle 30mm
H&R Lowering Springs Alfa Romeo Giulia Quadrifoglio 2WD 2016-, incl. Facelift 2020/2023- FA40/RA40mm
H&R Lowering Springs Alfa Romeo Giulia Quadrifoglio 2WD 2016-, incl. Facelift 2020/2023- FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo Giulia Quadrifoglio Type 952 2WD, only with Active Suspension, 2016-, incl. Facelift 2020/2023- Front axle 40mm / Rear axle 40mm
H&R Lowering Springs Alfa Romeo Giulietta 2010- FA30/RA30mm
H&R Lowering Springs Alfa Romeo Giulietta 2010- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo Giulietta/Giulietta Turismo Type 940 2010- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Alfa Romeo Giulietta Quadrifoglio Verde 2010- FA20/RA20mm
H&R Lowering Springs Alfa Romeo Giulietta Quadrifoglio Verde 2010- FA20/RA20mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo Giulietta Quadrifoglio Verde Type 940 including D.N.A. 2010- Front axle 20mm/Rear axle 20mm
H&R Lowering Springs Alfa Romeo GTV/Spider/Coupé 2WD 4/6-Cylinder up to 1060kg FA-Load 1995-1997 FA30/RA30mm
H&R Lowering Springs Alfa Romeo GTV/Spider/Coupé 2WD 4/6-Cylinder up to 1060kg FA-Load 1995-1997 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo GTV/Spider/Coupé Type 916, 2WD, 4/6-Cylinder, up to 1060kg Front axle load 1995-1997 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Alfa Romeo GTV/Spider/Coupé 2WD 4/6-Cylinder up to 162kW 1997-2006 FA30mm/RA30mm
H&R Lowering Springs Alfa Romeo GTV/Spider/Coupé 2WD 4/6-Cylinder up to 162kW 1997-2006 FA30mm/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo GTV/Spider/Coupé Type 916, 2WD, 4/6-Cylinder, up to 162kW 1997-2006 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Alfa Romeo MiTo/Fiat Grande Punto/Evo/Opel Corsa D/E 2005- FA30-50/RA30-40mm
H&R Lowering Springs Alfa Romeo MiTo/Fiat Grande Punto/Evo/Opel Corsa D/E 2005- FA30-50/RA30-40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo MiTo including Quadrifoglio Verde Type 955, from 851 up to 950kg Front axle load, up to 950kg Rear axle load, Low version, without TÜV-approval 2008- Front axle 35-40mm/Rear axle 35-40mmFiat Grande Punto/Evo including racing Type 199, from 851kg Front axle load, including Abarth, Low version 2005- Front axle 50mm/Rear axle 40mmOpel Corsa D including OPC Type S-D, from 851kg up to 955kg Front axle load, up to 845kg Rear axle load, Low version 2006- Front axle 50mm/Rear axle 40mmOpel Corsa E including OPC Type S-D, from 851kg up to 955kg Front axle load, up to 845kg Rear axle load, Low version 2014- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Alfa Romeo MiTo/Fiat Grande Punto/Evo/Opel Corsa D/E from 851kg FA-Load 2005- FA20-35/RA20-35mm
H&R Lowering Springs Alfa Romeo MiTo/Fiat Grande Punto/Evo/Opel Corsa D/E from 851kg FA-Load 2005- FA20-35/RA20-35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo MiTo including Quadrifoglio Verde Type 955, from 851kg Front axle load 2008- Front axle 30mm/Rear axle 30mmFiat Grande Punto/Evo including Racing Type 199, from 851kg Front axle load, including Abarth, with ABE 2005- Front axle 35mm/Rear axle 35mmOpel Corsa D including OPC Type S-D, from 851kg Front axle load, with ABE 2006- Front axle 35mm/Rear axle 35mmOpel Corsa E Type S-D, from 861kg Front axle load, with ABE 2014- Front axle 20mm/Rear axle 20mm
H&R Lowering Springs Alfa Romeo MiTo/Fiat Grande Punto/Evo/Opel Corsa D/E up to 850/860kg FA-Load 2005- FA35-50/RA40mm
H&R Lowering Springs Alfa Romeo MiTo/Fiat Grande Punto/Evo/Opel Corsa D/E up to 850/860kg FA-Load 2005- FA35-50/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo MiTo including Quadrifoglio Verde Type 955, up to 850kg Front axle load, Low version, without TÜV-approval 2008- Front axle 35-40mm/Rear axle 35-40mmFiat Grande Punto/Evo including Racing Type 199, up to 850kg Front axle load, Low version 2005- Front axle 50mm/Rear axle 40mmOpel Corsa D including OPC Type S-D, up to 850kg Front axle load, Low version 2006- Front axle 50mm/Rear axle 40mmOpel Corsa E Type S-D, up to 860kg Front axle load, Low version 2014- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Alfa Romeo MiTo/Fiat Grande Punto/Evo/Opel Corsa D/E up to 850kg FA-Load 2005- FA20-35/RA20-35mm
H&R Lowering Springs Alfa Romeo MiTo/Fiat Grande Punto/Evo/Opel Corsa D/E up to 850kg FA-Load 2005- FA20-35/RA20-35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo MiTo including Quadrifoglio Verde Type 955, up to 850kg Front axle load 2008- Front axle 30mm/Rear axle 30mmFiat Grande Punto/Evo including Racing Type 199, up to 850kg Front axle load, including Abarth, with ABE 2005- Front axle 35mm/Rear axle 35mmOpel Corsa D including OPC Type S-D, up to 850kg Front axle load, with ABE 2006- Front axle 35mm/Rear axle 35mmOpel Corsa E Type S-D, up to 860kg Front axle load, with ABE 2014- Front axle 20mm/Rear axle 20mm