Avisa Stainless Steel Rear bumper protector MG ZS II 2024- 'Ribs'
Stainless Steel Rear bumper protector MG ZS II 2024- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material: Avisa's bumper protectors are made of stainless steel, which in addition to protection also gives your car a stylish look. The material is strong, durable and weatherproof. This ensures that the cover will last for years. With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Avisa Stainless Steel Rear Bumper Protector Mitsubishi Outlander IV Facelift 2025- - Black
Avisa Stainless Steel Rear Bumper Protector Mitsubishi Outlander IV Facelift 2025- - BlackThe rear bumper sill is one of the areas of your vehicle most susceptible to damage. When loading and unloading the boot, the paintwork can easily be damaged by bags, suitcases, boxes or even pets. Scratches and wear are not only unsightly, but can also lead to costly repairs or a reduction in the value of your vehicle over time.A rear bumper protector effectively prevents this type of damage. This bumper protector provides an extra layer of protection on the loading edge of the boot, without affecting the design of your car. Thanks to its pre-formed design, the protective strip fits the bumper perfectly.This Black Brushed version is made from 0.5 mm stainless steel with a finely brushed texture that provides a bold and modern appearance. The brushed surface helps to conceal small scratches and signs of use, allowing the protector to maintain its clean look over time. This version fits perfectly with sporty or dark-coloured vehicles, while also creating a stylish contrast on cars with lighter paintwork. The bumper protector comes with pre-applied mounting tape and a cleaning cloth, allowing for easy and secure installation.About AvisaWith over 30 years of experience, Avisa is one of the world leaders in decorative steel and carbon car accessories. The brand is known for its modern design, precision manufacturing and high-quality finish.The range now includes over 1,000 different bumper guards in various finishes, almost every car make and model.Every Avisa protector is crafted from high-quality, durable materials that are resistant to rain, sun, dirt and temperature fluctuations. Whether you prefer stainless steel, matt black aluminium, carbon fibre or the robust Strong Edition, Avisa rear bumper protectors are designed to protect and enhance your car.
Avisa Stainless Steel Rear Bumper Protector Mitsubishi Outlander IV Facelift 2025- - Silver
Avisa Stainless Steel Rear Bumper Protector Mitsubishi Outlander IV Facelift 2025- - SilverThe rear bumper sill is one of the areas of your vehicle most susceptible to damage. When loading and unloading the boot, the paintwork can easily be damaged by bags, suitcases, boxes or even pets. Scratches and wear are not only unsightly, but can also lead to costly repairs or a reduction in the value of your vehicle over time.A rear bumper protector effectively prevents this type of damage. This bumper protector provides an extra layer of protection on the loading edge of the boot, without affecting the design of your car. Thanks to its pre-formed design, the protective strip fits the bumper perfectly.This silver steel version is made of 0.5 mm thick stainless steel and has a subtle, semi-matt sheen thanks to a finely brushed texture, which gives it a refined yet practical look. The brushed surface hides minor scratches and signs of wear, ensuring that the protector retains its look for a long time. The bumper protector comes with pre-applied mounting tape and a cleaning cloth, allowing for easy and secure installation. In addition, a silver polish is included to help you maintain the stainless steel finish.About AvisaWith over 30 years of experience, Avisa is one of the world leaders in decorative steel and carbon car accessories. The brand is known for its modern design, precision manufacturing and high-quality finish.The range now includes over 1,000 different bumper guards in various finishes, almost every car make and model.Every Avisa protector is crafted from high-quality, durable materials that are resistant to rain, sun, dirt and temperature fluctuations. Whether you prefer stainless steel, matt black aluminium, carbon fibre or the robust Strong Edition, Avisa rear bumper protectors are designed to protect and enhance your car.
Avisa Stainless Steel Rear bumper protector Omoda 5 2024- 'Ribs'
Stainless Steel Rear bumper protector Omoda 5 2024- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material: Avisa's bumper protectors are made of stainless steel, which in addition to protection also gives your car a stylish look. The material is strong, durable and weatherproof. This ensures that the cover will last for years. With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Avisa Stainless Steel Rear Bumper Protector Omoda 9 2025- - Matt Black
Avisa Stainless Steel Rear Bumper Protector Omoda 9 2025- - Matt BlackThe rear bumper sill is one of the areas of your vehicle most susceptible to damage. When loading and unloading the boot, the paintwork can easily be damaged by bags, suitcases, boxes or even pets. Scratches and wear are not only unsightly, but can also lead to costly repairs or a reduction in the value of your vehicle over time.A rear bumper protector effectively prevents this type of damage. This bumper protector provides an extra layer of protection on the loading edge of the boot, without affecting the design of your car. Thanks to its pre-formed design, the protective strip fits the bumper perfectly.The Matt Black version is made of 0.5 mm thick stainless steel with a durable powder coating in matt black, giving it a modern and robust look. The smooth matt finish hides minor scratches and signs of wear, allowing the protector to retain its neat, original look for a long time. Thanks to the powder coating, the surface is extra resistant to scratches, moisture and changes in temperature. This version is a perfect addition to sporty or dark-coloured vehicles, but also provides a stylish contrast on cars with a light-coloured paint finish. The bumper protector comes with pre-applied mounting tape, primer and a cleaning cloth, allowing for easy and secure installation.About AvisaWith over 30 years of experience, Avisa is one of the world leaders in decorative steel and carbon car accessories. The brand is known for its modern design, precision manufacturing and high-quality finish.The range now includes over 1,000 different bumper guards in various finishes, almost every car make and model.Every Avisa protector is crafted from high-quality, durable materials that are resistant to rain, sun, dirt and temperature fluctuations. Whether you prefer stainless steel, matt black aluminium, carbon fibre or the robust Strong Edition, Avisa rear bumper protectors are designed to protect and enhance your car.
Avisa Stainless Steel Rear Bumper Protector Omoda 9 2025- - Silver
Avisa Stainless Steel Rear Bumper Protector Omoda 9 2025- - SilverThe rear bumper sill is one of the areas of your vehicle most susceptible to damage. When loading and unloading the boot, the paintwork can easily be damaged by bags, suitcases, boxes or even pets. Scratches and wear are not only unsightly, but can also lead to costly repairs or a reduction in the value of your vehicle over time.A rear bumper protector effectively prevents this type of damage. This bumper protector provides an extra layer of protection on the loading edge of the boot, without affecting the design of your car. Thanks to its pre-formed design, the protective strip fits the bumper perfectly.This silver steel version is made of 0.5 mm thick stainless steel and has a subtle, semi-matt sheen thanks to a finely brushed texture, which gives it a refined yet practical look. The brushed surface hides minor scratches and signs of wear, ensuring that the protector retains its look for a long time. The bumper protector comes with pre-applied mounting tape and a cleaning cloth, allowing for easy and secure installation. In addition, a silver polish is included to help you maintain the stainless steel finish.About AvisaWith over 30 years of experience, Avisa is one of the world leaders in decorative steel and carbon car accessories. The brand is known for its modern design, precision manufacturing and high-quality finish.The range now includes over 1,000 different bumper guards in various finishes, almost every car make and model.Every Avisa protector is crafted from high-quality, durable materials that are resistant to rain, sun, dirt and temperature fluctuations. Whether you prefer stainless steel, matt black aluminium, carbon fibre or the robust Strong Edition, Avisa rear bumper protectors are designed to protect and enhance your car.
Avisa Stainless Steel Rear Bumper Protector Opel Frontera (EV) 2024- - Black
Avisa Stainless Steel Rear Bumper Protector Opel Frontera (EV) 2024- - BlackThe rear bumper sill is one of the areas of your vehicle most susceptible to damage. When loading and unloading the boot, the paintwork can easily be damaged by bags, suitcases, boxes or even pets. Scratches and wear are not only unsightly, but can also lead to costly repairs or a reduction in the value of your vehicle over time.A rear bumper protector effectively prevents this type of damage. This bumper protector provides an extra layer of protection on the loading edge of the boot, without affecting the design of your car. Thanks to its pre-formed design, the protective strip fits the bumper perfectly.This Black Brushed version is made from 0.5 mm stainless steel with a finely brushed texture that provides a bold and modern appearance. The brushed surface helps to conceal small scratches and signs of use, allowing the protector to maintain its clean look over time. This version fits perfectly with sporty or dark-coloured vehicles, while also creating a stylish contrast on cars with lighter paintwork. The bumper protector comes with pre-applied mounting tape and a cleaning cloth, allowing for easy and secure installation.About AvisaWith over 30 years of experience, Avisa is one of the world leaders in decorative steel and carbon car accessories. The brand is known for its modern design, precision manufacturing and high-quality finish.The range now includes over 1,000 different bumper guards in various finishes, almost every car make and model.Every Avisa protector is crafted from high-quality, durable materials that are resistant to rain, sun, dirt and temperature fluctuations. Whether you prefer stainless steel, matt black aluminium, carbon fibre or the robust Strong Edition, Avisa rear bumper protectors are designed to protect and enhance your car.
Avisa Stainless Steel Rear Bumper Protector Opel Frontera (EV) 2024- - Silver
Avisa Stainless Steel Rear Bumper Protector Opel Frontera (EV) 2024- - SilverThe rear bumper sill is one of the areas of your vehicle most susceptible to damage. When loading and unloading the boot, the paintwork can easily be damaged by bags, suitcases, boxes or even pets. Scratches and wear are not only unsightly, but can also lead to costly repairs or a reduction in the value of your vehicle over time.A rear bumper protector effectively prevents this type of damage. This bumper protector provides an extra layer of protection on the loading edge of the boot, without affecting the design of your car. Thanks to its pre-formed design, the protective strip fits the bumper perfectly.This silver steel version is made of 0.5 mm thick stainless steel and has a subtle, semi-matt sheen thanks to a finely brushed texture, which gives it a refined yet practical look. The brushed surface hides minor scratches and signs of wear, ensuring that the protector retains its look for a long time. The bumper protector comes with pre-applied mounting tape and a cleaning cloth, allowing for easy and secure installation.About AvisaWith over 30 years of experience, Avisa is one of the world leaders in decorative steel and carbon car accessories. The brand is known for its modern design, precision manufacturing and high-quality finish.The range now includes over 1,000 different bumper guards in various finishes, almost every car make and model.Every Avisa protector is crafted from high-quality, durable materials that are resistant to rain, sun, dirt and temperature fluctuations. Whether you prefer stainless steel, matt black aluminium, carbon fibre or the robust Strong Edition, Avisa rear bumper protectors are designed to protect and enhance your car.
Avisa Stainless Steel Rear Bumper Protector Opel Grandland II 2024- - Silver - 2-pieces
Avisa Stainless Steel Rear Bumper Protector Opel Grandland II 2024- - Silver - 2-piecesThe rear bumper sill is one of the areas of your vehicle most susceptible to damage. When loading and unloading the boot, the paintwork can easily be damaged by bags, suitcases, boxes or even pets. Scratches and wear are not only unsightly, but can also lead to costly repairs or a reduction in the value of your vehicle over time.A rear bumper protector effectively prevents this type of damage. This bumper protector provides an extra layer of protection on the loading edge of the boot, without affecting the design of your car. Thanks to its pre-formed design, the protective strip fits the bumper perfectly.This silver steel version is made of 0.5 mm thick stainless steel and has a subtle, semi-matt sheen thanks to a finely brushed texture, which gives it a refined yet practical look. The brushed surface hides minor scratches and signs of wear, ensuring that the protector retains its look for a long time. The bumper protector comes with pre-applied mounting tape and a cleaning cloth, allowing for easy and secure installation. In addition, a silver polish is included to help you maintain the stainless steel finish.About AvisaWith over 30 years of experience, Avisa is one of the world leaders in decorative steel and carbon car accessories. The brand is known for its modern design, precision manufacturing and high-quality finish.The range now includes over 1,000 different bumper guards in various finishes, almost every car make and model.Every Avisa protector is crafted from high-quality, durable materials that are resistant to rain, sun, dirt and temperature fluctuations. Whether you prefer stainless steel, matt black aluminium, carbon fibre or the robust Strong Edition, Avisa rear bumper protectors are designed to protect and enhance your car.
Avisa Stainless Steel Rear bumper protector Renault Scenic E-Tech 2024- 'Ribs'
Stainless Steel Rear bumper protector Renault Scenic E-Tech 2024- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material: Avisa's bumper protectors are made of stainless steel, which in addition to protection also gives your car a stylish look. The material is strong, durable and weatherproof. This ensures that the cover will last for years. With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Avisa Stainless Steel Rear bumper protector Subaru Crosstrek III 2023- 'Ribs'
Stainless Steel Rear bumper protector Subaru Crosstrek III 2023- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material: Avisa's bumper protectors are made of stainless steel, which in addition to protection also gives your car a stylish look. The material is strong, durable and weatherproof. This ensures that the cover will last for years. With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Avisa Stainless Steel Rear bumper protector Subaru Forester (SL) 2025- 'Ribs'
Stainless Steel Rear bumper protector Subaru Forester (SL) 2025- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material: Avisa's bumper protectors are made of stainless steel, which in addition to protection also gives your car a stylish look. The material is strong, durable and weatherproof. This ensures that the cover will last for years. With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Avisa Stainless Steel Rear Bumper Protector Toyota RAV4 VI (XA6) 2026- - Black
Avisa Stainless Steel Rear Bumper Protector Toyota RAV4 VI (XA6) 2026- - BlackThe rear bumper sill is one of the areas of your vehicle most susceptible to damage. When loading and unloading the boot, the paintwork can easily be damaged by bags, suitcases, boxes or even pets. Scratches and wear are not only unsightly, but can also lead to costly repairs or a reduction in the value of your vehicle over time.A rear bumper protector effectively prevents this type of damage. This bumper protector provides an extra layer of protection on the loading edge of the boot, without affecting the design of your car. Thanks to its pre-formed design, the protective strip fits the bumper perfectly.This Black Brushed version is made from 0.5 mm stainless steel with a finely brushed texture that provides a bold and modern appearance. The brushed surface helps to conceal small scratches and signs of use, allowing the protector to maintain its clean look over time. This version fits perfectly with sporty or dark-coloured vehicles, while also creating a stylish contrast on cars with lighter paintwork. The bumper protector comes with pre-applied mounting tape and a cleaning cloth, allowing for easy and secure installation.About AvisaWith over 30 years of experience, Avisa is one of the world leaders in decorative steel and carbon car accessories. The brand is known for its modern design, precision manufacturing and high-quality finish.The range now includes over 1,000 different bumper guards in various finishes, almost every car make and model.Every Avisa protector is crafted from high-quality, durable materials that are resistant to rain, sun, dirt and temperature fluctuations. Whether you prefer stainless steel, matt black aluminium, carbon fibre or the robust Strong Edition, Avisa rear bumper protectors are designed to protect and enhance your car.
Avisa Stainless Steel Rear Bumper Protector Toyota RAV4 VI (XA6) 2026- - High Gloss Silver
Avisa Stainless Steel Rear Bumper Protector Toyota RAV4 VI (XA6) 2026- - High Gloss SilverThe rear bumper sill is one of the areas of your vehicle most susceptible to damage. When loading and unloading the boot, the paintwork can easily be damaged by bags, suitcases, boxes or even pets. Scratches and wear are not only unsightly, but can also lead to costly repairs or a reduction in the value of your vehicle over time.A rear bumper protector effectively prevents this type of damage. This bumper protector provides an extra layer of protection on the loading edge of the boot, without affecting the design of your car. Thanks to its pre-formed design, the protective strip fits the bumper perfectly.The Silver Mirror, or Chrome Stainless Steel, features a high-gloss mirror finish that gives the rear of the vehicle an exclusive, luxurious look. The polished 0.5 mm stainless steel reflects light, further accentuating the car's design. The bumper protector comes with pre-applied mounting tape and a cleaning cloth, allowing for easy and secure installation.About AvisaWith over 30 years of experience, Avisa is one of the world leaders in decorative steel and carbon car accessories. The brand is known for its modern design, precision manufacturing and high-quality finish.The range now includes over 1,000 different bumper guards in various finishes, almost every car make and model.Every Avisa protector is crafted from high-quality, durable materials that are resistant to rain, sun, dirt and temperature fluctuations. Whether you prefer stainless steel, matt black aluminium, carbon fibre or the robust Strong Edition, Avisa rear bumper protectors are designed to protect and enhance your car.
Avisa Stainless Steel Rear Bumper Protector Toyota RAV4 VI (XA6) 2026- - Matt Black
Avisa Stainless Steel Rear Bumper Protector Toyota RAV4 VI (XA6) 2026- - Matt Black The rear bumper sill is one of the areas of your vehicle most susceptible to damage. When loading and unloading the boot, the paintwork can easily be damaged by bags, suitcases, boxes or even pets. Scratches and wear are not only unsightly, but can also lead to costly repairs or a reduction in the value of your vehicle over time.A rear bumper protector effectively prevents this type of damage. This bumper protector provides an extra layer of protection on the loading edge of the boot, without affecting the design of your car. Thanks to its pre-formed design, the protective strip fits the bumper perfectly.The Matt Black version is made of 0.5 mm thick stainless steel with a durable powder coating in matt black, giving it a modern and robust look. The smooth matt finish hides minor scratches and signs of wear, allowing the protector to retain its neat, original look for a long time. Thanks to the powder coating, the surface is extra resistant to scratches, moisture and changes in temperature. This version is a perfect addition to sporty or dark-coloured vehicles, but also provides a stylish contrast on cars with a light-coloured paint finish. The bumper protector comes with pre-applied mounting tape and a cleaning cloth, allowing for easy and secure installation.About AvisaWith over 30 years of experience, Avisa is one of the world leaders in decorative steel and carbon car accessories. The brand is known for its modern design, precision manufacturing and high-quality finish.The range now includes over 1,000 different bumper guards in various finishes, almost every car make and model.Every Avisa protector is crafted from high-quality, durable materials that are resistant to rain, sun, dirt and temperature fluctuations. Whether you prefer stainless steel, matt black aluminium, carbon fibre or the robust Strong Edition, Avisa rear bumper protectors are designed to protect and enhance your car.
Avisa Stainless Steel Rear Bumper Protector Toyota RAV4 VI (XA6) 2026- - Silver
Avisa Stainless Steel Rear Bumper Protector Toyota RAV4 VI (XA6) 2026- - SilverThe rear bumper sill is one of the areas of your vehicle most susceptible to damage. When loading and unloading the boot, the paintwork can easily be damaged by bags, suitcases, boxes or even pets. Scratches and wear are not only unsightly, but can also lead to costly repairs or a reduction in the value of your vehicle over time.A rear bumper protector effectively prevents this type of damage. This bumper protector provides an extra layer of protection on the loading edge of the boot, without affecting the design of your car. Thanks to its pre-formed design, the protective strip fits the bumper perfectly.This silver steel version is made of 0.5 mm thick stainless steel and has a subtle, semi-matt sheen thanks to a finely brushed texture, which gives it a refined yet practical look. The brushed surface hides minor scratches and signs of wear, ensuring that the protector retains its look for a long time. The bumper protector comes with pre-applied mounting tape and a cleaning cloth, allowing for easy and secure installation. In addition, a silver polish is included to help you maintain the stainless steel finish.About AvisaWith over 30 years of experience, Avisa is one of the world leaders in decorative steel and carbon car accessories. The brand is known for its modern design, precision manufacturing and high-quality finish.The range now includes over 1,000 different bumper guards in various finishes, almost every car make and model.Every Avisa protector is crafted from high-quality, durable materials that are resistant to rain, sun, dirt and temperature fluctuations. Whether you prefer stainless steel, matt black aluminium, carbon fibre or the robust Strong Edition, Avisa rear bumper protectors are designed to protect and enhance your car.
Avisa Stainless Steel Rear Bumper Protector Shadow Premium Nissan Qashqai III (J12) 2021-2024 & Facelift 2024- - Black / High Gloss Black
Avisa Stainless Steel Rear Bumper Protector Shadow Premium Nissan Qashqai III (J12) 2021-2024 & Facelift 2024- - Black / High Gloss BlackThe rear bumper sill is one of the areas of your vehicle most susceptible to damage. When loading and unloading the boot, the paintwork can easily be damaged by bags, suitcases, boxes or even pets. Scratches and wear are not only unsightly, but can also lead to costly repairs or a reduction in the value of your vehicle over time.A rear bumper protector effectively prevents this type of damage. This bumper protector provides an extra layer of protection on the loading edge of the boot, without affecting the design of your car. Thanks to its pre-formed design, the protective strip fits the bumper perfectly.The Shadow Premium version is made of 0.5 mm thick stainless steel and stands out thanks to a unique combination of two finishes: a semi-matt brushed base with a glossy insert. This mix of matt and mirrored details gives the protector an exclusive, layered look that perfectly matches modern vehicle styling. The bumper protector comes with pre-applied mounting tape and a cleaning cloth, allowing for easy and secure installation.About AvisaWith over 30 years of experience, Avisa is one of the world leaders in decorative steel and carbon car accessories. The brand is known for its modern design, precision manufacturing and high-quality finish.The range now includes over 1,000 different bumper guards in various finishes, almost every car make and model.Every Avisa protector is crafted from high-quality, durable materials that are resistant to rain, sun, dirt and temperature fluctuations. Whether you prefer stainless steel, matt black aluminium, carbon fibre or the robust Strong Edition, Avisa rear bumper protectors are designed to protect and enhance your car.
Avisa Universal Door Sill Protector Set 'Shadow Premium' Aluminium/Black - 2-Pieces - 54 x 4 cm
Universal Door Sill Protector Set 'Shadow Premium' Aluminium/Black - 2-Pieces - 54 x 4 cm Door sills protectors are the ultimate accessories to protect the door sills of your car and give them a luxurious look. These are universal protectors with a specific size, please check which size fits your type of car. It prevents scratches and damage caused by everyday use and protects against weather influences. With a large choice of material and design you can add an individual look to your car. These door sill protectors are easy to attach using the supplied 3M tape. Specifications Additional information54 x 4 cm each with LinesContent2-piece setColourBlackMaterialAluminium
B&C-Pillar Stabilizer bars Honda Civic 1992-1995 - set of 3 pieces
B&C-Pillar Stabilizer bars Honda Civic 1992-1995 - set of 3 pieces
BA9S LED Bulbs 12V Xenon-Optics White, set of 2 pieces
BA9S LED Bulbs 12V Xenon-Optics White, set of 2 pieces 4-LED 1.8W 200Lm 7000K Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Batavia MaxxSafe Car Window Breaker - Life Saving Tool
Batavia MaxxSafe Car Window Breaker - Life Saving ToolCRASH-TURN-ESCAPETens of thousands of cars crash into water each year. This can be due to weather conditions, missing or broken guardrails alongside the water or car accidents. In 99 percent of these cases, the front end of the car is the first to go under water. This makes the back seat and trunk the last places where the passengers can take a breath and have a possible escape route. With a traditional safety hammer, most occupants (especially children) are unable to escape. To break a car window with a safety hammer underwater requires a lot of force, due to the resistance offered by the water. In addition, the window will break only if enough force is applied to the right spot. Children or more vulnerable occupants are dependent on an adult passenger or the driver to escape from the car. The Maxxsafe® is designed to give all occupants (especially children) a chance to escape, even from a sinking car. The Maxxsafe® is placed on the rear window, so it will always be in the right place when the car is submerged in water. When the Maxxsafe® comes into contact with water, a red LED light will flash. This makes the Maxxsafe® always easy to find, even when it is completely dark.To break the window, the Maxxsafe® only needs to be turned. This will cause a pin to shoot against the window, after which the window will be shattered. Fixed attachment to the car windowWith LED lightEasy to use in all circumstancesIncluding separate belt cutterTÜV approval
BAX9S (H6) SMD/LED AC Bulbs 12V Xenon-Optics White, set of 2 pieces, with CAN-bus resistance
BAX9S (H6) SMD/LED AC Bulbs 12V Xenon-Optics White, set of 2 pieces, with CAN-bus resistance Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
BAX9S (H6) SMD/LED DC (reverse pole) Bulbs 12V Xenon-Optics White, set of 2 pieces, with CAN-bus resistance
BAX9S (H6) SMD/LED DC (reverse pole) Bulbs 12V Xenon-Optics White, set of 2 pieces, with CAN-bus resistance Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Benson Electric Winch 1000 kg 12V 15-meter
1000 kg pulling capacity, 1000kg plus rolling capacity, with safety hook, and remote control.
Benson Repair set car tire 28 pieces
A professional tyre repair kit for the car. Ideal for quick repair in emergencies. Comes in a handy case.
Bilstein B12 (36-281831) Toyota 4Runner V (N28) 2.7 / 4.0 08/2009- / FJ Cruiser 4.0 06/2005- - rear axle - RA+35-60mm
Bilstein B12 Special (36-281831) Toyota 4Runner V (N28) 2.7 / 4.0 08/2009- / FJ Cruiser 4.0 06/2005- - rear axle - RA+35-60mmTransform the appearance and handling of your vehicle with the Bilstein B12 Performance suspension kit, a complete suspension upgrade combining Bilstein performance dampers with matched lowering springs. Designed to improve both driving dynamics and ride quality, the B12 offers a sportier stance, enhanced stability and more precise vehicle control without compromising everyday comfort.Developed and tested as a complete package, the B12 combines vehicle-specific spring and damper characteristics to create a balanced suspension system with predictable handling and excellent road manners. Lowering the vehicle's centre of gravity helps improve cornering stability and steering response, while maintaining sufficient comfort for daily driving and longer journeys.Bilstein combines more than 60 years of original equipment expertise with over 50 years of motorsport experience. Every suspension component is developed and refined through extensive road testing to deliver the renowned Bilstein driving experience, balancing comfort, control and performance in a wide range of driving conditions.:Toyota 4 Runner V (_N28_) - raising rear axle 35-60 mm with axle load up to 180 kg2.7 116 kW/158 hp 01/2010-2.7 4WD 117 kW/159 hp 09/2009-12/20104.0 183-202 kW/249-275 hp 01/2010-4.0 4WD 198-202 kW/269-275 hp 08/2009-Toyota Fj Cruiser (GSJ1_) - raising rear axle 35-60 mm with axle load up to 180 kg4.0 176-194 kW/239-264 hp 06/2005-12/20144.0 4WD 176-203 kW/239-276 hp 06/2005-
Bilstein B12 (46-000033) BMW Z4 Roadster E85 / Coupé E86 M / 3.2 09/2005-12/2008 - FA20/RA10mm
Bilstein B12 Pro-Kit (46-000033) BMW Z4 Roadster E85 / Coupé E86 M / 3.2 09/2005-12/2008 - FA20/RA10mmTransform the appearance and handling of your vehicle with the Bilstein B12 Performance suspension kit, a complete suspension upgrade combining Bilstein performance dampers with matched lowering springs. Designed to improve both driving dynamics and ride quality, the B12 offers a sportier stance, enhanced stability and more precise vehicle control without compromising everyday comfort.Developed and tested as a complete package, the B12 combines vehicle-specific spring and damper characteristics to create a balanced suspension system with predictable handling and excellent road manners. Lowering the vehicle's centre of gravity helps improve cornering stability and steering response, while maintaining sufficient comfort for daily driving and longer journeys.Bilstein combines more than 60 years of original equipment expertise with over 50 years of motorsport experience. Every suspension component is developed and refined through extensive road testing to deliver the renowned Bilstein driving experience, balancing comfort, control and performance in a wide range of driving conditions.:BMW Z4 Coupe (E86) - lowering front axle 20 mm / rear axle 10 mmM 235-252 kW/320-343 hp 03/2006-12/2008BMW Z4 Roadster (E85) - lowering front axle 20 mm / rear axle 10 mm3.2 235 kW/320 hp 09/2005-12/2007M 252 kW/343 hp 01/2006-08/2008
Bilstein B12 (46-000071) Alfa Romeo Brera (939) 2.4 JTDM / 3.2 JTS 01/2006-03/2011 - FA25-30/RA25mm
Bilstein B12 Pro-Kit (46-000071) Alfa Romeo Brera (939) 2.4 JTDM / 3.2 JTS 01/2006-03/2011 - FA25-30/RA25mmTransform the appearance and handling of your vehicle with the Bilstein B12 Performance suspension kit, a complete suspension upgrade combining Bilstein performance dampers with matched lowering springs. Designed to improve both driving dynamics and ride quality, the B12 offers a sportier stance, enhanced stability and more precise vehicle control without compromising everyday comfort.Developed and tested as a complete package, the B12 combines vehicle-specific spring and damper characteristics to create a balanced suspension system with predictable handling and excellent road manners. Lowering the vehicle's centre of gravity helps improve cornering stability and steering response, while maintaining sufficient comfort for daily driving and longer journeys.Bilstein combines more than 60 years of original equipment expertise with over 50 years of motorsport experience. Every suspension component is developed and refined through extensive road testing to deliver the renowned Bilstein driving experience, balancing comfort, control and performance in a wide range of driving conditions.:Alfa Romeo Brera (939_) - lowering front axle 25-30 mm / rear axle 25 mm2.4 JTDM 20V 147-154 kW/200-210 hp 01/2006-03/20113.2 JTS 191 kW/260 hp 03/2008-06/2010
Bilstein B12 (46-000095) Alfa Romeo Spider (939) 2.4 JTDM / 3.2 JTS 03/2006-03/2011 - FA20/RA20mm
Bilstein B12 Pro-Kit (46-000095) Alfa Romeo Spider (939) 2.4 JTDM / 3.2 JTS 03/2006-03/2011 - FA20/RA20mmTransform the appearance and handling of your vehicle with the Bilstein B12 Performance suspension kit, a complete suspension upgrade combining Bilstein performance dampers with matched lowering springs. Designed to improve both driving dynamics and ride quality, the B12 offers a sportier stance, enhanced stability and more precise vehicle control without compromising everyday comfort.Developed and tested as a complete package, the B12 combines vehicle-specific spring and damper characteristics to create a balanced suspension system with predictable handling and excellent road manners. Lowering the vehicle's centre of gravity helps improve cornering stability and steering response, while maintaining sufficient comfort for daily driving and longer journeys.Bilstein combines more than 60 years of original equipment expertise with over 50 years of motorsport experience. Every suspension component is developed and refined through extensive road testing to deliver the renowned Bilstein driving experience, balancing comfort, control and performance in a wide range of driving conditions.:Alfa Romeo Spider (939_) - lowering front axle 20 mm / rear axle 20 mm2.4 JTDM 147-154 kW/200-210 hp 03/2006-03/20113.2 JTS 191 kW/260 hp 03/2008-03/20113.2 JTS Q4 191 kW/260 hp 03/2006-03/2011
Bilstein B12 (46-000101) BMW 3-Series E30 320 i / 323 i / 325 e 2.7 / 325 i 09/1982-12/1991 - FA30-40/RA30mm
Bilstein B12 Pro-Kit (46-000101) BMW 3-Series E30 320 i / 323 i / 325 e 2.7 / 325 i 09/1982-12/1991 - FA30-40/RA30mmTransform the appearance and handling of your vehicle with the Bilstein B12 Performance suspension kit, a complete suspension upgrade combining Bilstein performance dampers with matched lowering springs. Designed to improve both driving dynamics and ride quality, the B12 offers a sportier stance, enhanced stability and more precise vehicle control without compromising everyday comfort.Developed and tested as a complete package, the B12 combines vehicle-specific spring and damper characteristics to create a balanced suspension system with predictable handling and excellent road manners. Lowering the vehicle's centre of gravity helps improve cornering stability and steering response, while maintaining sufficient comfort for daily driving and longer journeys.Bilstein combines more than 60 years of original equipment expertise with over 50 years of motorsport experience. Every suspension component is developed and refined through extensive road testing to deliver the renowned Bilstein driving experience, balancing comfort, control and performance in a wide range of driving conditions.:BMW 3-Series (E30) - strut outside diameter [mm] 51 - lowering front axle 30-40 mm / rear axle 30 mm320 i 92-95 kW/125-129 hp 09/1982-12/1991323 i 102-110 kW/139-150 hp 09/1982-09/1986325 e 2.7 90-95 kW/122-129 hp 10/1983-12/1988325 i 125-126 kW/170-171 hp 09/1983-06/1991
Bilstein B12 (46-000118) BMW 3-Series E30 316 i / 318 i / 318 is 09/1982-12/1991 - FA30-40/RA30mm
Bilstein B12 Pro-Kit (46-000118) BMW 3-Series E30 316 i / 318 i / 318 is 09/1982-12/1991 - FA30-40/RA30mmTransform the appearance and handling of your vehicle with the Bilstein B12 Performance suspension kit, a complete suspension upgrade combining Bilstein performance dampers with matched lowering springs. Designed to improve both driving dynamics and ride quality, the B12 offers a sportier stance, enhanced stability and more precise vehicle control without compromising everyday comfort.Developed and tested as a complete package, the B12 combines vehicle-specific spring and damper characteristics to create a balanced suspension system with predictable handling and excellent road manners. Lowering the vehicle's centre of gravity helps improve cornering stability and steering response, while maintaining sufficient comfort for daily driving and longer journeys.Bilstein combines more than 60 years of original equipment expertise with over 50 years of motorsport experience. Every suspension component is developed and refined through extensive road testing to deliver the renowned Bilstein driving experience, balancing comfort, control and performance in a wide range of driving conditions.:BMW 3-Series (E30) - strut outside diameter [mm] 51 - lowering front axle 30-40 mm / rear axle 30 mm316 i 73-75 kW/100-102 hp 08/1987-06/1991318 i 75-85 kW/102-115 hp 09/1982-12/1991318 is 100 kW/136 hp 09/1989-08/1991
Bilstein B12 (46-000132) BMW 3-Series Convertible E30 320 i / 325 i 12/1985-11/1993 - FA30-40/RA30mm
Bilstein B12 Pro-Kit (46-000132) BMW 3-Series Convertible E30 320 i / 325 i 12/1985-11/1993 - FA30-40/RA30mmTransform the appearance and handling of your vehicle with the Bilstein B12 Performance suspension kit, a complete suspension upgrade combining Bilstein performance dampers with matched lowering springs. Designed to improve both driving dynamics and ride quality, the B12 offers a sportier stance, enhanced stability and more precise vehicle control without compromising everyday comfort.Developed and tested as a complete package, the B12 combines vehicle-specific spring and damper characteristics to create a balanced suspension system with predictable handling and excellent road manners. Lowering the vehicle's centre of gravity helps improve cornering stability and steering response, while maintaining sufficient comfort for daily driving and longer journeys.Bilstein combines more than 60 years of original equipment expertise with over 50 years of motorsport experience. Every suspension component is developed and refined through extensive road testing to deliver the renowned Bilstein driving experience, balancing comfort, control and performance in a wide range of driving conditions.:BMW 3-Series Convertible (E30) - strut outside diameter [mm] 51 - lowering front axle 30-40 mm / rear axle 30 mm320 i 93-95 kW/126-129 hp 05/1986-11/1993325 i 125-126 kW/170-171 hp 12/1985-11/1993
Bilstein B12 (46-000156) BMW 3-Series Convertible E30 318 i 09/1990-10/1993 - FA30/RA30mm
Bilstein B12 Pro-Kit (46-000156) BMW 3-Series Convertible E30 318 i 09/1990-10/1993 - FA30/RA30mmTransform the appearance and handling of your vehicle with the Bilstein B12 Performance suspension kit, a complete suspension upgrade combining Bilstein performance dampers with matched lowering springs. Designed to improve both driving dynamics and ride quality, the B12 offers a sportier stance, enhanced stability and more precise vehicle control without compromising everyday comfort.Developed and tested as a complete package, the B12 combines vehicle-specific spring and damper characteristics to create a balanced suspension system with predictable handling and excellent road manners. Lowering the vehicle's centre of gravity helps improve cornering stability and steering response, while maintaining sufficient comfort for daily driving and longer journeys.Bilstein combines more than 60 years of original equipment expertise with over 50 years of motorsport experience. Every suspension component is developed and refined through extensive road testing to deliver the renowned Bilstein driving experience, balancing comfort, control and performance in a wide range of driving conditions.:BMW 3-Series Convertible (E30) - strut outside diameter [mm] 51 - lowering front axle 30 mm / rear axle 30 mm318 i 83-103 kW/113-140 hp 09/1990-10/1993
Bilstein B12 (46-000163) BMW 3-Series E30 320 i / 320 is / 323 i / 324 d / 324 td / 325 i 09/1982-12/1991 - FA30-40/RA30mm
Bilstein B12 Pro-Kit (46-000163) BMW 3-Series E30 320 i / 320 is / 323 i / 324 d / 324 td / 325 i 09/1982-12/1991 - FA30-40/RA30mmTransform the appearance and handling of your vehicle with the Bilstein B12 Performance suspension kit, a complete suspension upgrade combining Bilstein performance dampers with matched lowering springs. Designed to improve both driving dynamics and ride quality, the B12 offers a sportier stance, enhanced stability and more precise vehicle control without compromising everyday comfort.Developed and tested as a complete package, the B12 combines vehicle-specific spring and damper characteristics to create a balanced suspension system with predictable handling and excellent road manners. Lowering the vehicle's centre of gravity helps improve cornering stability and steering response, while maintaining sufficient comfort for daily driving and longer journeys.Bilstein combines more than 60 years of original equipment expertise with over 50 years of motorsport experience. Every suspension component is developed and refined through extensive road testing to deliver the renowned Bilstein driving experience, balancing comfort, control and performance in a wide range of driving conditions.:BMW 3-Series (E30) - strut outside diameter [mm] 51 - lowering front axle 30-40 mm / rear axle 30 mm320 i 92-95 kW/125-129 hp 09/1982-12/1991320 is 141 kW/192 hp 05/1988-12/1990323 i 102-110 kW/139-150 hp 09/1982-09/1986324 d 63 kW/86 hp 09/1985-12/1990324 td 85 kW/115 hp 09/1987-08/1991325 i 125-126 kW/170-171 hp 09/1983-06/1991
Bilstein B12 (46-000187) Seat Altea (5P) 1.4 TSI / 1.6 / 2.0 FSI 03/2004-07/2015 - FA30/RA30mm
Bilstein B12 Pro-Kit (46-000187) Seat Altea (5P) 1.4 TSI / 1.6 / 2.0 FSI 03/2004-07/2015 - FA30/RA30mmTransform the appearance and handling of your vehicle with the Bilstein B12 Performance suspension kit, a complete suspension upgrade combining Bilstein performance dampers with matched lowering springs. Designed to improve both driving dynamics and ride quality, the B12 offers a sportier stance, enhanced stability and more precise vehicle control without compromising everyday comfort.Developed and tested as a complete package, the B12 combines vehicle-specific spring and damper characteristics to create a balanced suspension system with predictable handling and excellent road manners. Lowering the vehicle's centre of gravity helps improve cornering stability and steering response, while maintaining sufficient comfort for daily driving and longer journeys.Bilstein combines more than 60 years of original equipment expertise with over 50 years of motorsport experience. Every suspension component is developed and refined through extensive road testing to deliver the renowned Bilstein driving experience, balancing comfort, control and performance in a wide range of driving conditions.:Seat Altea (5P1) - lowering front axle 30 mm / rear axle 30 mm1.4 TSI 92 kW/125 hp 11/2007-07/20151.6 75 kW/102 hp 03/2004-03/20102.0 FSI 110 kW/150 hp 05/2004-03/2009
Bilstein B12 (46-000194) Seat Altea (5P) 1.8 TFSI / 1.9 TDI / 2.0 FSI / 2.0 TDI / 2.0 TDI 16V / 2.0 TFSI 03/2004-07/2015 - FA30/RA30mm
Bilstein B12 Pro-Kit (46-000194) Seat Altea (5P) 1.8 TFSI / 1.9 TDI / 2.0 FSI / 2.0 TDI / 2.0 TDI 16V / 2.0 TFSI 03/2004-07/2015 - FA30/RA30mmTransform the appearance and handling of your vehicle with the Bilstein B12 Performance suspension kit, a complete suspension upgrade combining Bilstein performance dampers with matched lowering springs. Designed to improve both driving dynamics and ride quality, the B12 offers a sportier stance, enhanced stability and more precise vehicle control without compromising everyday comfort.Developed and tested as a complete package, the B12 combines vehicle-specific spring and damper characteristics to create a balanced suspension system with predictable handling and excellent road manners. Lowering the vehicle's centre of gravity helps improve cornering stability and steering response, while maintaining sufficient comfort for daily driving and longer journeys.Bilstein combines more than 60 years of original equipment expertise with over 50 years of motorsport experience. Every suspension component is developed and refined through extensive road testing to deliver the renowned Bilstein driving experience, balancing comfort, control and performance in a wide range of driving conditions.:Seat Altea (5P1) - lowering front axle 30 mm / rear axle 30 mm1.8 TFSI 118 kW/160 hp 01/2007-07/20151.9 TDI 66-77 kW/90-105 hp 04/2004-12/20102.0 FSI 110 kW/150 hp 05/2004-03/20092.0 TDI 100-125 kW/136-170 hp 03/2004-05/20102.0 TDI 16V 103 kW/140 hp 03/2004-07/20152.0 TFSI 147 kW/200 hp 04/2006-05/2009