In this category you will find lowering springs. Lower your car easily with these springs. You use the springs not only because it looks good, but also because you greatly improve road holding. We supply lowering springs from all famous brands such as AP, H&R, Eibach, Vogtland, supersport and ST .
Besides lowering springs, we also have Eibach-Lift-Kits. This increase is for a better off-road driving experience.
If you can not find certain lowering springs in our webshop, ask one of our employees.
H&R Lowering Springs Nissan Micra (K14) 2017- 35mm
H&R Lowering Springs Nissan Micra (K14) 2017- 35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Micra (K14) 2017- 35mm
H&R Lowering Springs Nissan Micra 1985-1992 FA35/RA35mm
H&R Lowering Springs Nissan Micra 1985-1992 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Micra (March) Type K10 1985-1992 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Nissan Micra 1992-2003 FA30/RA30mm
H&R Lowering Springs Nissan Micra 1992-2003 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Micra (March) Type K11 1992-2003 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Nissan Micra 2010- FA35/RA20mm
H&R Lowering Springs Nissan Micra 2010- FA35/RA20mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Micra Type K13 2010- Front axle 35mm/Rear axle 20mm
H&R Lowering Springs Nissan Micra/Convertible 2WD 2003-2010 FA35/RA35mm
H&R Lowering Springs Nissan Micra/Convertible 2WD 2003-2010 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Micra (March) including C+C, Convertible Type K12, 2WD, including Convertible (including 160SR) 2003-2010 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Nissan Murano V6 3.5L 2004- FA50/RA50mm
H&R Lowering Springs Nissan Murano V6 3.5L 2004- FA50/RA50mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Murano Type Z50, V6, 3.5L 2004- Front axle 50mm/Rear axle 50mm
H&R Lowering Springs Nissan Navara 2005- FA60mm
H&R Lowering Springs Nissan Navara 2005- FA60mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered without ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Navara Type D40, 2005- Front axle 60mm
H&R Lowering Springs Nissan Note 2WD 2006- FA45/RA45mm
H&R Lowering Springs Nissan Note 2WD 2006- FA45/RA45mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Note Type E11, 2WD (Tone), with ABE 2006- Front axle 45mm/Rear axle 45mm
H&R Lowering Springs Nissan NV300 FL 2021- & Renault Trafic FL 2019- - FA35/RA30mm (short & long wheel base)
H&R Lowering Springs Nissan NV300 FL 2021- & Renault Trafic FL 2019- - FA35/RA30mm (short & long wheel base)H&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance :Nissan NV300 Type F4/J4/4/E4, Facelift 2021-, Front axle 35mm/Rear axle 30mm (short & long wheel base)Renault Trafic Type FL/JL/L/EL, Facelift 2019-, Front axle 35mm/Rear axle 30mm (short & long wheel base)
H&R Lowering Springs Nissan NV300 FL 2021- & Renault Trafic FL 2019- - FA35mm (only long wheel base)
H&R Lowering Springs Nissan NV300 FL 2021- & Renault Trafic FL 2019- - FA35mm (only long wheel base)H&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance :Nissan NV300 Type F4/J4/4/E4, Facelift 2021-, Front axle 35mm (Only long wheel base)Renault Trafic Type FL/JL/L/EL, Facelift 2019-, Front axle 35mm (Only long wheel base)
H&R Lowering Springs Nissan Pathfinder 1996-2005 FA35/RA35mm
H&R Lowering Springs Nissan Pathfinder 1996-2005 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Pathfinder Type R50 1996-2005 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Nissan Pixo/Suzuki Alto 2009- FA35/RA35mm
H&R Lowering Springs Nissan Pixo/Suzuki Alto 2009- FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Pixo Type HF 2009- Front axle 35mm/Rear axle 35mmSuzuki Alto Type GF 2009- Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Nissan Primastar 2014-2019 / NV300 2016-2021 & Opel Vivaro B 2014-2019 & Renault Trafic 2014-2019 & Fiat talento 2016-2019 - (2WD) FA40mm (long wheel base only)
H&R Lowering Springs Nissan Primastar 2014-2019 / NV300 2016-2021 & Opel Vivaro B 2014-2019 & Renault Trafic 2014-2019 & Fiat talento 2016-2019 - (2WD) FA40mm (long wheel base only)H&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance :Nissan Primastar Type F4/J4/4/E4, 2WD, 2014-2019, only long wheelbase (3498mm), Front axle 40mmNissan NV300 Type F4/J4/4/E4, 2WD, 2016-2021, only long wheelbase, Front axle 40mmOpel Vivaro B Type F7/X83, 2WD, 2014-2019, only long wheelbase (3498mm), Front axle 40mmRenault Trafic Type FL/JL/L/EL, 2WD, 2014-2019, only long wheelbase (3498mm), Front axle 40mmFiat Talento Type FJL/FFL, 2WD, 2016-2019, only long wheelbase, Front axle 40mm
H&R Lowering Springs Nissan Primastar/Opel Vivaro/Renault Trafic 2001-2014 FA35/RA40mm
H&R Lowering Springs Nissan Primastar/Opel Vivaro/Renault Trafic 2001-2014 FA35/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance :Nissan Primastar Type F4/J4/4 2001-2014Opel Vivaro Type F7, X83 2001-2014Renault Trafic Type FL/JL/L 2001-2014Front axle 35mm/Rear axle 40mm.
H&R Lowering Springs Nissan Primera 1.6L 1990-1996 FA30/RA30mm
H&R Lowering Springs Nissan Primera 1.6L 1990-1996 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Primera Type P 10, 1.6L (G20) 1990-1996 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Nissan Primera Combi Diesel 1998-2002 FA35/RA35mm
H&R Lowering Springs Nissan Primera Combi Diesel 1998-2002 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Primera Combi Type P 11, only Diesel 1998-2002 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Nissan Primera Combi Diesel 2WD 1.9/2.0/2.2L 2002-2008 FA40/RA40mm
H&R Lowering Springs Nissan Primera Combi Diesel 2WD 1.9/2.0/2.2L 2002-2008 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Primera Combi Diesel Type P12, 2WD, 1.9L/2.0L/2.2L Diesel 2002-2008 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Nissan Primera Combi excl. Diesel 1990-1998 FA35/RA35mm
H&R Lowering Springs Nissan Primera Combi excl. Diesel 1990-1998 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Primera Combi Type W 10,exclusive Diesel 1990-1998 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Nissan Primera Combi Petrol 1998-2002 FA35/RA35mm
H&R Lowering Springs Nissan Primera Combi Petrol 1998-2002 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Primera Combi Type P 11, only petrol 1998-2002 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Nissan Primera Combi Petrol 2WD 1.6/1.8/2.0L 2002-2008 FA40/RA40mm
H&R Lowering Springs Nissan Primera Combi Petrol 2WD 1.6/1.8/2.0L 2002-2008 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Primera Combi petrol Type P12, 2WD, 1.6L/1.8L/2.0L 2002-2008 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Nissan Primera Sedan Diesel 1996-2002 FA35/RA35mm
H&R Lowering Springs Nissan Primera Sedan Diesel 1996-2002 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Primera Sedan Type P 11, only Diesel (G20) 1996-2002 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Nissan Primera Sedan Diesel 2WD 1.9/2.0/2.2L 2002-2008 FA40/RA40mm
H&R Lowering Springs Nissan Primera Sedan Diesel 2WD 1.9/2.0/2.2L 2002-2008 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Primera Sedan Diesel Type P12, 2WD, 1.9L/2.0L/2.2L Diesel 2002-2008 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Nissan Primera Sedan Petrol 1996-2002 FA35/RA35mm
H&R Lowering Springs Nissan Primera Sedan Petrol 1996-2002 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Primera Sedan Type P 11, only petrol (G20) 1996-2002 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Nissan Primera Sedan Petrol 2WD 1.6/1.8/2.0L 2002-2008 FA40/RA40mm
H&R Lowering Springs Nissan Primera Sedan Petrol 2WD 1.6/1.8/2.0L 2002-2008 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Primera Sedan petrol Type P12, 2WD, 1.6L/1.8L/2.0L 2002-2008 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Nissan Qashqai 2WD up to 1000kg RA-Load 2007- FA30/RA45mm
H&R Lowering Springs Nissan Qashqai 2WD up to 1000kg RA-Load 2007- FA30/RA45mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Qashqai Type J10, 2WD (Dualis), up to 1000kg Rear axle load 2007- Front axle 30mm/Rear axle 45mm
H&R Lowering Springs Nissan Qashqai 4WD 2007- FA30/RA45mm & Renault Koleos II 2WD/4WD 2016- FA/RA35mm
H&R Lowering Springs Nissan Qashqai 4WD 2007- FA30/RA45mm & Renault Koleos II 2WD/4WD 2016- FA/RA35mm H&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Sporty appearance Lowered center of gravity Linear or progressive spring design Compatible with OE and aftermarket shock absorbers Improved handling characteristics Delivered with ABE or TÜV approval Engineered, manufactured and tested in Germany Powder coated for enhanced appearance and corrosion resistance : Nissan Qashqai Type J10, 4WD (Dualis) 2007- Front axle 30mm/Rear axle 45mm Renault Koleos II Type RZG, 2WD/4WD 2016- Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Nissan Qashqai/Renault Koleos 2/4WD 2008- FA30-40/RA40-45mm
H&R Lowering Springs Nissan Qashqai/Renault Koleos 2/4WD 2008- FA30-40/RA40-45mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Qashqai Type J10, 2/4WD (Dualis) 2008- Front axle 30mm/Rear axle 45mmRenault Koleos Type Y, 2/4WD 2008- Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Nissan Sunny 1986-1991 FA40/RA40mm
H&R Lowering Springs Nissan Sunny 1986-1991 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Sunny Type B 12/N 13 (Pulsar/Sentra/Sabre) 1986-1991 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Nissan Sunny 2WD 1.4/1.6/2.0L/Diesel 1991-1995 FA40/RA40mm
H&R Lowering Springs Nissan Sunny 2WD 1.4/1.6/2.0L/Diesel 1991-1995 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Sunny Type N 14, 2WD, 1.4L/1.6L/2.0L/Diesel (Pulsar/Sentra) 1991-1995 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Nissan Sunny/Cherry 1982-1986 FA30/RA30mm
H&R Lowering Springs Nissan Sunny/Cherry 1982-1986 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Nissan Sunny/Cherry (Datsun) N 12/B 11 1982-1986 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Opel Adam (S) 2013- FA25/RA25mm
H&R Lowering Springs Opel Adam (S) 2013- FA25/RA25mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Adam including Adam S Type S-D, with ABE, except models with OE-sport suspension 2013- Front axle 25mm/Rear axle 25mm
H&R Lowering Springs Opel Agila/Suzuki Splash/Swift Petrol 2005- FA30-40/RA30-40mm
H&R Lowering Springs Opel Agila/Suzuki Splash/Swift Petrol 2005- FA30-40/RA30-40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Agila Type H-B, with ABE 2008- Front axle 30mm/Rear axle 30mmSuzuki Splash Type EX, only petrol, with ABE 2008- Front axle 30-35mm/Rear axle 30-35mmSuzuki Swift petrol Type MZ/EZ, with ABE 2005- Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Opel Agila/Suzuki Wagon R 2000- FA40/RA40mm
H&R Lowering Springs Opel Agila/Suzuki Wagon R 2000- FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Agila Type H00 2000- Front axle 40mm/Rear axle 40mmSuzuki Wagon R Type MM (Solio) 2000-2008 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Opel Ascona C 1981-1988 FA55/RA55mm
H&R Lowering Springs Opel Ascona C 1981-1988 FA55/RA55mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Ascona C C+CC (Cavalier) 1981-1988 Front axle 55mm/Rear axle 55mm
H&R Lowering Springs Opel Astra F (Convertible) 1.4/1.8L excl. Diesel 1991-1998 FA35/RA35mm
H&R Lowering Springs Opel Astra F (Convertible) 1.4/1.8L excl. Diesel 1991-1998 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Astra F 1.4L/1.8L, exclusive Diesel, including T92 1991-1998 Front axle 35mm/Rear axle 35mmOpel Astra F Convertible 1.4L/1.8L, exclusive Diesel, including T92 1991-1998 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Opel Astra F (Convertible) 1.8/2.0L/1.7L T Diesel 16V 1991-1998 FA35/RA35mm
H&R Lowering Springs Opel Astra F (Convertible) 1.8/2.0L/1.7L T Diesel 16V 1991-1998 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Astra F 1.8L 16V + 2.0L + 2.0L 16V + 1.7L Turbo Diesel 1991-1998 Front axle 35mm/Rear axle 35mmOpel Astra F Convertible 1.8L 16V + 2.0L + 2.0L 16V + 1.7L Turbo Diesel 1991-1998 Front axle 35mm/Rear axle 35mm