In this category you will find lowering springs. Lower your car easily with these springs. You use the springs not only because it looks good, but also because you greatly improve road holding. We supply lowering springs from all famous brands such as AP, H&R, Eibach, Vogtland, supersport and ST .
Besides lowering springs, we also have Eibach-Lift-Kits. This increase is for a better off-road driving experience.
If you can not find certain lowering springs in our webshop, ask one of our employees.
H&R Lowering Springs Opel GT 2007- FA40/RA50mm
H&R Lowering Springs Opel GT 2007- FA40/RA50mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel GT Type K/R 2007- Front axle 40mm/Rear axle 50mm
H&R Lowering Springs Opel Insignia Country Tourer 4WD 2017- FA35/RA35mm
H&R Lowering Springs Opel Insignia Country Tourer 4WD 2017- FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Insignia Country Tourer/SW, 4WD Type Z-B, up to 1100kg Front Axle-Load, inclusive Flexride 2017- Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Opel Insignia GSI Grand Sport/Sedan/Sports Tourer/SW 4WD 2017- FA25/RA25mm - FA: 1101kg-
H&R Lowering Springs Opel Insignia GSI Grand Sport/Sedan/Sports Tourer/SW 4WD 2017- FA25/RA25mm - FA: 1101kg-H&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Insignia GSI Grand Sport/Sedan Type Z-B, 4WD, from 1101kg front axle load, including Flexride, 2017- Front axle 25mm / Rear axle 25mmOpel Insignia GSI Sports Tourer/SW Type Z-B, 4WD, from 1101kg front axle load, including Flexride, 2017- Front axle 25mm / Rear axle 25mm
H&R Lowering Springs Opel Insignia Sedan 4WD from 1161kg FA-Load 2008- FA20-30/RA20-30mm
H&R Lowering Springs Opel Insignia Sedan 4WD from 1161kg FA-Load 2008- FA20-30/RA20-30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Insignia Sedan including Facelift 2013 Type 0G-A, 4WD, from 1161kg Front axle load, also for cars with Flex Ride suspension, with ABE 2008- Front axle 20-30mm/Rear axle 20-30mm
H&R Lowering Springs Opel Insignia Sedan/OPC/Facelift 4WD 2008- FA20-30/RA15-30mm
H&R Lowering Springs Opel Insignia Sedan/OPC/Facelift 4WD 2008- FA20-30/RA15-30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Insignia Sedan including Facelift 2013 Type 0G-A, 4WD, up to 1160kg Front axle load, also for cars with Flex Ride suspension, with ABE 2008- Front axle 20-30mm/Rear axle 20-30mmOpel Insignia Sedan OPC Models, including Facelift 2013, Type 0G-A, 4WD, OPC Models, also for cars with Flex Ride suspension, with ABE 2008- Front axle 20-25mm/Rear axle 15-20mm
H&R Lowering Springs Opel Insignia Sportstourer/Country Tourer Combi 4WD from 1161kg FA-Load 2009- FA20-30/RA20-30mm
H&R Lowering Springs Opel Insignia Sportstourer/Country Tourer Combi 4WD from 1161kg FA-Load 2009- FA20-30/RA20-30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Insignia Sportstourer including Facelift 2013, Type 0G-A, 4WD, from 1161kg Front axle load, also for cars with Flex Ride suspension, for cars without self-levelling, with ABE 2009- Front axle 20-30mm/Rear axle 20-30mmOpel Insignia Country Tourer Combi Type 0G-A, only 4WD, from 1161kg Front axle load 2013- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Opel Insignia Sportstourer/Facelift/OPC/Country Tourer Combi 4WD 2009- FA20-30/RA15-30mm
H&R Lowering Springs Opel Insignia Sportstourer/Facelift/OPC/Country Tourer Combi 4WD 2009- FA20-30/RA15-30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Insignia Sportstourer including Facelift 2013, Type 0G-A, 4WD, up to 1160kg Front axle load, also for cars with Flex Ride suspension, for cars without self-levelling, with ABE 2009- Front axle 20-30mm/Rear axle 20-30mmOpel Insignia Sportstourer OPC Models including Facelift 2013, Type 0G-A, 4WD, OPC Models, also for cars with Flex Ride suspension, for cars without self-levelling, with ABE 2009- Front axle 20-25mm/Rear axle 15-20mmOpel Insignia Country Tourer Combi Type 0G-A, only 4WD, up to 1160kg Front axle load 2013- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Opel Kadett E 1986-1992 FA40/RA40mm
H&R Lowering Springs Opel Kadett E 1986-1992 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Kadett E Notchback (Astra E) 1986-1992 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Opel Kadett E Convertible 1984-1992 FA35/RA35mm
H&R Lowering Springs Opel Kadett E Convertible 1984-1992 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Kadett E Convertible (Astra E) 1984-1992 Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Opel Kadett E including GSI 2.0L 1984-1992 FA40/RA40mm
H&R Lowering Springs Opel Kadett E including GSI 2.0L 1984-1992 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Kadett E Hatchback, including GSI 2.0L (Astra E) 1984-1992 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Opel Kadett E Sportstourer 1984-1992 FA40/RA40mm
H&R Lowering Springs Opel Kadett E Sportstourer 1984-1992 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Kadett E Sportstourer (Astra E SW) 1984-1992 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Opel Manta B 1975-1989 FA50/RA50mm
H&R Lowering Springs Opel Manta B 1975-1989 FA50/RA50mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Manta B B,CC, only with short shock absorbers 1975-1989 Front axle 50mm/Rear axle 50mm
H&R Lowering Springs Opel Meriva B from 1061kg FA-Load 2010- FA30/RA30mm
H&R Lowering Springs Opel Meriva B from 1061kg FA-Load 2010- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Meriva B Type S-D/Monocab B, from 1061kg Front axle load 2010- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Opel Meriva B up to 1060kg FA-Load 2010- FA30/RA30mm
H&R Lowering Springs Opel Meriva B up to 1060kg FA-Load 2010- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Meriva B Type S-D/Monocab B, up to 1060kg Front axle load 2010- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Opel Omega A Sportstourer 4-Cylinder -1994 FA50/RA50mm
H&R Lowering Springs Opel Omega A Sportstourer 4-Cylinder -1994 FA50/RA50mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Omega A Sportstourer, 4-Cylinder (Carlton A) -1994 Front axle 50mm/Rear axle 50mm
H&R Lowering Springs Opel Omega A Sportstourer 6-Cylinder -1994 FA40/RA40mm
H&R Lowering Springs Opel Omega A Sportstourer 6-Cylinder -1994 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Omega A Sportstourer, 6-Cylinder (Carlton A) -1994 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Opel Omega B Sportstourer SW/V94 from 936kg FA-Load 1994- FA35/RA35mm
H&R Lowering Springs Opel Omega B Sportstourer SW/V94 from 936kg FA-Load 1994- FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Omega B Sportstourer SW + V94, from 936kg Front axle load (Carlton B), for cars without self-levelling 1994- Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Opel Omega B Sportstourer SW/V94 up to 935kg FA-Load 1994- FA35/RA35mm
H&R Lowering Springs Opel Omega B Sportstourer SW/V94 up to 935kg FA-Load 1994- FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Omega B Sportstourer SW + V94, up to 935kg Front axle load (Carlton B), for cars without self-levelling 1994- Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Opel Omega B/V94 from 936kg FA-Load 1994- FA35/RA35mm
H&R Lowering Springs Opel Omega B/V94 from 936kg FA-Load 1994- FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Omega B+V94, from 936kg Front axle load (Carlton B) 1994- Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Opel Signum/Vectra C Sportstourer excl 3.0L V6 CDTI/Saab 9-3 from 1001kg FA-Load 2003- FA40/RA40mm
H&R Lowering Springs Opel Signum/Vectra C Sportstourer excl 3.0L V6 CDTI/Saab 9-3 from 1001kg FA-Load 2003- FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Signum Type Signum Vectra-C exclusive 3.0L V6 CDTI including IDS/IDS Plus 2003-Opel Vectra C Sportstourer including OPC exclusive 3.0L V6 CDTI including IDS/IDS Plus/IDS Plus 2 2003-Saab 9-3 Convertible/Combi Type Y3SFX7XX/Y3SFXXXX, 2WD 2003-Front axle 40mm/Rear axle 40mm. With ABE. From 1001kg front axle load.
H&R Lowering Springs Opel Signum/Vectra C Sportstourer/Saab 9-3 Convertible/Combi up to 1000kg FA-Load 2003- FA40/RA40mm
H&R Lowering Springs Opel Signum/Vectra C Sportstourer/Saab 9-3 Convertible/Combi up to 1000kg FA-Load 2003- FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Signum Type Signum Vectra-C including IDS/IDS Plus 2003-Opel Vectra C Sportstourer including OPC including IDS/IDS Plus/IDS Plus 2 2003-Saab 9-3 Convertible/Combi Type YS3FX7XX/YS3FXXXX, 2WD 2003-Front axle 40mm/Rear axle 40mm. Up to 1000kg Front axle load. With ABE.
H&R Lowering Springs Opel Sintra 1997- FA35/RA35mm
H&R Lowering Springs Opel Sintra 1997- FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Sintra Type GM 200-GME (Venture) 1997- Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Opel Tigra A 1994- FA35/RA35mm
H&R Lowering Springs Opel Tigra A 1994- FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Tigra A Type S 93 Coupé (Sport) 1994- Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Opel Tigra A up to 78kW 1994- FA30/RA30mm
H&R Lowering Springs Opel Tigra A up to 78kW 1994- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Tigra A Type S 93 Coupé up to 78kW (Comfort) 1994- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Opel Vectra 2000 2/4WD 1989-1995 FA25/RA25mm
H&R Lowering Springs Opel Vectra 2000 2/4WD 1989-1995 FA25/RA25mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Vectra 2000 2/4WD 4x4 (Cavalier) 1989-1995 Front axle 25mm/Rear axle 25mm
H&R Lowering Springs Opel Vectra 4WD 1989-1995 FA30/RA30mm
H&R Lowering Springs Opel Vectra 4WD 1989-1995 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Vectra 4x4 4WD (Cavalier) 1989-1995 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Opel Vectra A V6 1988-1995 FA30/RA30mm
H&R Lowering Springs Opel Vectra A V6 1988-1995 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Vectra A V6 (Cavalier) 1988-1995 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Opel Vectra B Sportstourer 1996-2003 FA30/RA30mm
H&R Lowering Springs Opel Vectra B Sportstourer 1996-2003 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Vectra B Sportstourer Type J96/Combi + J96/Combi/i including I500 1996-2003 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Opel Vectra B-CC Sedan from 926kg FA-Load 1995-2002 FA30/RA30mm
H&R Lowering Springs Opel Vectra B-CC Sedan from 926kg FA-Load 1995-2002 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Vectra B-CC Sedan from 926kg Front axle load 1995-2002 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Opel Vectra B/B-CC Sedan up to 925kg FA-Load 1995-2002 FA30/RA30mm
H&R Lowering Springs Opel Vectra B/B-CC Sedan up to 925kg FA-Load 1995-2002 FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Vectra B Sedan up to 925kg Front axle load 1995-2002 Front axle 30mm/Rear axle 30mmOpel Vectra B-CC Sedan up to 925kg Front axle load 1995-2002 Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Opel Vivaro incl. Life & Zafira Life - (2WD) 2019- VA30/RA30mm
H&R Lowering Springs Opel Vivaro incl. Life & Zafira Life - (2WD) 2019- VA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance :Opel Vivaro incl. Life Type V, 2WD, 2019-, excl. EV, incl. Cargo/Combi/Double cabin/Flexspace, only wheelbase (3275mm) Only for total vehicle length of 4956-4659mm(M) & 5306-5309mm(L) Front axle 40mm/Rear axle 30mmOpel Life Type V, 2WD, 2019-, excl. EV, incl. Cargo/Combi/Double cabin/Flexspace, only wheelbase (3275mm) Only for total vehicle length of 4956-4659mm(M) & 5306-5309mm(L) Front axle 40mm/Rear axle 30mm
H&R Lowering Springs Opel Zafira A 1.6/1.8/2.0/2.2L Petrol 1998- FA35/RA35mm
H&R Lowering Springs Opel Zafira A 1.6/1.8/2.0/2.2L Petrol 1998- FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Opel Zafira A Type T98 Monocab 1.6L/1.8L/2.0L/2.2L petrol 1998- Front axle 35mm/Rear axle 35mm
H&R Lowering Springs Peugeot 1007 2005- FA30/RA30mm
H&R Lowering Springs Peugeot 1007 2005- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 1007 Type K 2005- Front axle 30mm/Rear axle 30mm
H&R Lowering Springs Peugeot 106 1992-1996 FA25mm
H&R Lowering Springs Peugeot 106 1992-1996 FA25mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 106 Type 1C 1992-1996 Front axle 25mm/Rear axle Torsion axle
H&R Lowering Springs Peugeot 205 1983-1998 FA40/RA40mm
H&R Lowering Springs Peugeot 205 1983-1998 FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 205 including Convertible Type 741 A+B+C/20 A+C+D 1983-1998 Front axle 40mm/Rear axle 40mm
H&R Lowering Springs Peugeot 206 1998- FA30-35mm
H&R Lowering Springs Peugeot 206 1998- FA30-35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Peugeot 206, +RC, 206+, Sedan+ Combi/Sedan Type 2HFY/2KFX/2WJZ/2NFZ/2HFZ/2RFR/2RHY/2HFX/2KFW/2NFU/2RFN/2WJY/28HX/28HZ/29HZ/2KFU/2RFK 1998- Front axle 30-35mm