The 12 Volt Carpoint magnetic LED lighting set with E-mark is convenient for trailer or bike carrier. The lighting set consists of 2 waterproof square LED rear lights with a large magnet at the back. This makes it easy to attach the rear lights directly to the sheet metal of a trailer. The rear lights have a 7-pin plug and a cable with a length of 7.5 metres. The cable between the two rear lights is 2.5 metres. The LED rear light has the following functions: 1. Direction indicator 2. Rear light 3. Brake light 4. Number plate light. There are per bulb; 5 red LEDs for the rear light and brake, 5 orange LEDs for the indicator and 4 white LEDs for the number plate light on the side of the bulb. When fitting, make sure that the indicator are also fitted on the right side.

Carpoint 12 Volt LED reversing light with 36 LEDs and E-mark for car, caravan or trailer, The reversing light is in a sturdy waterproof (IP67) plastic housing. Higher light output and lower power consumption due to the use of LED bulbs. The lamp can be mounted with the supplied screw fitting, which has a centre distance of 55 mm. Connecting the lamp can be done with the two connection wires. The size is 9.5x9.5x3.4 centimetres. Check beforehand whether LED lights are suitable because of their lower power consumption. For example: indicator will blink faster or a dashboard message will appear that a car lamp is defective.

Carpoint 12/24 Volt LED reversing light with 12 LEDs and E-mark for car, caravan or trailer. The reversing light is in a sturdy plastic housing. Higher light output and lower power consumption due to the use of LED bulbs. The light can be mounted by screw fastening. The lamp can be connected with the two connection wires. Check beforehand whether LED lights are suitable because of their lower power consumption. For example: indicator flashes faster or a dashboard message appears that a car lamp is defective.

With this Carpoint LED socket tester, the wiring and connections of a 12 Volt socket can be tested and checked for correct operation. Thanks to the double plug on the tester, both 7-pole and 13-pole sockets can be tested. The test box is also cars with a Canbus connection. The cable has a length of about 3.5 metres so you can test from the driver's seat. From inside the vehicle, test each circuit one by one using the buttons and levers in the car. The LED indicator lights up when the circuit is working correctly.

Carpoint red/white LED trailer marker light for mounting on the left side of a trailer. The marker light has an angle of 60° (inclined model) and has 6 bright LEDs. The LED lights are in a rubber flexible arm with a width of 150mm. Easy to mount with the pre-drilled holes in the rubber base measuring 90x40mm. 10-30 Volts, cord length about 20cm and with E-Certification.

Carpoint red/white LED Trailer marker light for mounting on the left side of a trailer. The sidelightwith E-approval has 6 bright LEDS and a cable length of about 20cm. The LED lights are placed in a sturdy rubber housing with a width of 73mm. Easy to mount with the pre-drilled holes in the rubber base with a dimension of 90x40mm. The diameter of the LED lamp is 45mm and 10-30 Volt.

Carpoint red/white LED trailer marker light for mounting on the right side of a trailer. The marker light has an angle of 60° ( inclined model) and has 6 bright LEDs. The LED lights are in a rubber flexible arm with a width of 150mm. Easy to mount with the pre-drilled holes in the rubber base measuring 90x40mm. 10-30 Volts, cord length about 20cm and with E-Certification.

Carpoint red/white LED Trailer marker light for mounting on the right side of a trailer. The sidelightwith E-approval has 6 bright LEDS and a cable length of about 20cm. The LED lights are placed in a sturdy rubber housing with a width of 72mm. Easy to mount with the pre-drilled holes in the rubber base with a dimension of 90x40mm. The diameter of the LED lamp is 45mm and 10-30 Volt.

Specially designed for illuminating bike carriers. This way, you are still clearly visible in traffic with a bicycle carrier on the back of your car. The Lighting Bar has a size of 85x15cm and you mount the ready-to-use lighting yourself on the bike carrier.

Retracted.

The Carpoint LPG retracted protection cap neatly closes off the LPG installation in the car. This protects the installation from external weather influences. The retracted 51mm long LPG cap is easy to lock with the bayonet lock.

This Carpoint LPG nipple Europe is a connector for refuelling LPG abroad. The brass filling adapter is easy to screw into the LPG refuelling system by hand. refuelling in: * Belgium * Germany * England * Luxembourg * Ireland * Scotland * Northern Ireland In addition, this LPG nipple is also refuelling at a limited number of filling stations in Switzerland and Poland.

This Carpoint LPG nipple Italy is a connector for refuelling LPG abroad. The brass filling adapter is easy to screw into the LPG refuelling system by hand. refuelling in: * Bosnia-Herzegovina * Denmark * France * Greece * Hungary * Italy * Croatia * Montenegro * Norway * Austria * Portugal * Serbia * Slovenia * Slovakia * Czech Republic * Sweden In addition, this LPG nipple is also refuelling at a limited number of filling stations in Spain and Switzerland.

This Carpoint LPG nipple Netherlands 10mm is a connector with bayonet connection for refuelling LPG in the Netherlands. In addition, this brass filling adapter can be used in England, Norway and Spain.

This Carpoint LPG nipple Netherlands 22mm is a connector with bayonet connection for refuelling LPG in the Netherlands. In addition, this brass filling adapter can be used in England, Norway and Spain.