JBL Club A600 1-Kanal Mono Subwoofer Amplifier (1x 600W) MONO600 WATTS RMSValue engineered car amplifier with JBL power and performance.The JBL Club A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.FeaturesCompact sizeHigh and low level inputVariable crossover and bass boostLow noise and distortionInput Level ControlFull on-board protectionPhase SwitchRBC wired remote Features and BenefitsCompact sizeThe JBL Club A600 amplifier features a low-profile chassis and a small overall footprint to fit in more vehicles where available space is limited.High and low level inputSpeaker-level and low-level inputs allow the Club A600 to integrate with both aftermarket and factory car stereo systems.Variable crossover and bass boostUnlike many amplifiers available at similar prices, the JBL Club A600 features variable electronic crossovers and bass boost circuits allowing for precise system tuning and performance.Low noise and distortionThe Club A600 has been engineered using Balanced Differential Inputs to ensure low noise and distortion even at high output levels. This also makes it far less susceptible to line induced radiated engine noise.Input Level ControlWhen low-level inputs are used, this control adjusts the input sensitivity between 200mVrms and 2.0Vrms. When high-level inputs are used, this control adjusts the input sensitivity between 2Vrms and 20Vrms.Full on-board protectionOn-board circuitry protects the Club A600 from shorts, high-temperature, overvoltage and undervoltage. An LED indicator is provided to let you know when one of these conditions exists.Phase SwitchThis switch changes the input phase to inverted or non-inverted. This is especially helpful as part of system tuning based on the enclosure type and location in the vehicle.RBC wired remoteThe RBC wired remote is an easy installation and can be mounted for convenient volume adjustment from driver’s seat.Class D amp technologyThe JBL Club A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw.Turn-on modeThis switch changes DC to REM to adapt with low-level signals or high-level signals, this is especially helpful as part of remote turn-on lead of your installation more choice. A selectable “Turn-on mode” can protect battery to avoid current drain, when you don’t expect to turn on your amplifier.Technical specifications:Mono subwoofer car amplifier350 watts RMS x 1 at 4 ohms(600 watts RMS x 1 at 2 ohms)Class D amp technologyVariable low-pass filter (32–320 Hz,12 dB/octave)Variable bass boost (0-12dB at 45Hz)Phase switch (0, 180 degrees)Preamp and speaker-level inputsFuse rating: 30A x 28-gauge power and ground leads recommended — wiring and hardware not included with amplifierW x H x D = 220mm x 51.3mm x 180mmW x H x D = 8-11/16'' x 2-1/16'' x 7-1/8''What's in the boxOne Club A600 mono subwoofer car amplifierFour 30A ATO fuses (2 installed, 2 spare)2 Bare wire-to-RCA adaptersRemote bass control module16.5' Remote control cable (RJ-25 plugs on both ends)2 Self-tapping screws for remote (M3 x 15mm)4 Mounting screws (M4 x 53mm)Owner’s ManualTwo JBL stickers1 logo badage

MONO 600 WATT RMS   Waardevolle autoversterker met JBL vermogen en prestaties. De JBL Club A600 mono subwooferversterker levert 600 watt RMS met behulp van een klasse D-versterkerontwerp om een ​​hoog uitgangsvermogen en een minimaal stroomverbruik te garanderen. Dankzij de ingangen op luidsprekerniveau kan deze versterker in bijna elk systeem worden geïntegreerd, zelfs in een systeem dat de fabrieksradio van uw auto gebruikt. U kunt het laagdoorlaatfilter en de variabele basversterking gebruiken om de prestaties van uw subwoofer en behuizing te maximaliseren, terwijl een faseschakelaar ervoor zorgt dat de bas goed opgaat in uw full-range luidsprekers.   Functies Compacte maat Ingang op hoog en laag niveau Variabele crossover en basversterking Lage ruis en vervorming Ingangsniveauregeling Volledige bescherming aan boord Faseschakelaar RBC bedrade afstandsbediening       Kenmerken en voordelen Compacte maat De JBL Club A600-versterker heeft een onopvallend chassis en een kleine totale voetafdruk om in meer voertuigen te passen waar de beschikbare ruimte beperkt is. Ingang op hoog en laag niveau Ingangen op luidsprekerniveau en laag niveau zorgen ervoor dat de Club A600 kan worden geïntegreerd met zowel aftermarket- als fabrieksautostereosystemen. Variabele crossover en basversterking In tegenstelling tot veel versterkers die tegen vergelijkbare prijzen verkrijgbaar zijn, is de JBL Club A600 voorzien van variabele elektronische crossovers en basversterkingscircuits, waardoor nauwkeurige systeemafstemming en prestaties mogelijk zijn. Lage ruis en vervorming De Club A600 is ontworpen met behulp van gebalanceerde differentiële ingangen om zelfs bij hoge uitgangsniveaus een laag geluidsniveau en vervorming te garanderen. Dit maakt het ook veel minder gevoelig voor lijngeïnduceerd uitgestraald motorgeluid. Ingangsniveauregeling Wanneer low-level ingangen worden gebruikt, past deze regelaar de ingangsgevoeligheid aan tussen 200mVrms en 2.0Vrms. Wanneer ingangen op hoog niveau worden gebruikt, past deze besturing de ingangsgevoeligheid aan tussen 2Vrms en 20Vrms. Volledige bescherming aan boord De ingebouwde circuits beschermen de Club A600 tegen kortsluiting, hoge temperaturen, overspanning en onderspanning. Er wordt een LED-indicator meegeleverd om u te laten weten wanneer een van deze situaties zich voordoet. Faseschakelaar Deze schakelaar verandert de ingangsfase in geïnverteerd of niet-geïnverteerd. Dit is vooral handig als onderdeel van het afstemmen van het systeem op basis van het type behuizing en de locatie in het voertuig. RBC bedrade afstandsbediening De bedrade afstandsbediening van de RBC is een eenvoudige installatie en kan worden gemonteerd voor gemakkelijke volumeregeling vanaf de bestuurdersstoel. Klasse D versterkertechnologie De JBL Club A600 mono subwooferversterker levert 600 watt RMS met behulp van een klasse D-versterkerontwerp om een ​​hoog uitgangsvermogen en een minimaal stroomverbruik te garanderen. Inschakelmodus Deze schakelaar verandert DC naar REM om zich aan te passen aan signalen van laag niveau of signalen van hoog niveau, dit is vooral handig als onderdeel van een externe inschakelkabel van uw installatie, meer keuze. Een selecteerbare "Inschakelmodus" kan de batterij beschermen om stroomverbruik te voorkomen, wanneer u niet verwacht uw versterker in te schakelen.   Technische specificaties: Mono subwoofer auto versterker 350 watt RMS x 1 bij 4 ohm (600 watt RMS x 1 bij 2 ohm) Klasse D versterkertechnologie Variabel laagdoorlaatfilter (32-320 Hz, 12 dB/octaaf) Variabele basversterking (0-12dB bij 45Hz) Faseschakelaar (0, 180 graden) Voorversterker- en luidsprekerniveau-ingangen Zekering: 30A x 2 8-gauge voedings- en aardingskabels aanbevolen — bedrading en hardware niet meegeleverd met versterker B x H x D = 220 mm x 51,3 mm x 180 mm B x H x D = 8-11/16" x 2-1/16" x 7-1/8"       Verpakkingsinhoud Een Club A600 mono subwoofer autoversterker Vier 30A ATO-zekeringen (2 geïnstalleerd, 2 reserve) 2 blote draad-naar-RCA-adapters Module voor basbesturing op afstand 16,5' Afstandsbedieningskabel (RJ-25-stekkers aan beide uiteinden) 2 zelftappende schroeven voor afstandsbediening (M3 x 15mm) 4 bevestigingsschroeven (M4 x 53 mm) Gebruikershandleiding Twee JBL-stickers 1 logobadge

JBL Club A754 4-Channel Amplifier (4x 75W) 4 x 75 Watts RMS or 2 x 100 Watts RMSHigh performance 4 channel car amplifierValue engineered car amplifier with JBL power and performance.The Club A754 4-channel amplifier delivers a powerful 75-Watts RMS to each of the front and rear speakers in your car. You can also bridge the amp to 2-channel mode to drive a couple subs with 200 watts RMS or 3-channel mode to drive both a pair of full range speakers and a subwoofer. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics.FeaturesCompact sizeHigh and low level inputVariable crossoverLow noise and distortionInput Level ControlFull on-board protectionPreamp OutputsClass H amp technologyTurn-on mode Features and BenefitsCompact sizeThe JBL Club A754 amplifier features a low-profile chassis and a small overall footprint to fit in more vehicles where available space is limited.High and low level inputSpeaker-level and low-level inputs allow the Club A754 to integrate with both aftermarket and factory car stereo systems.Variable crossoverUnlike many amplifiers available at similar prices, the JBL Club A754 features variable electronic crossovers for precise system tuning and performance.Low noise and distortionThe Club A754 has been engineered using Balanced Differential Inputs to ensure low noise and distortion even at high output levels. This also makes it far less susceptible to line induced engine noise.Input Level ControlWhen low-level inputs are used, this control adjusts the input sensitivity between 200mVrms and 2.0 Vrms. When high-level inputs are used, this control adjusts the input sensitivity between 2Vrms and 20Vrms.Full on-board protectionOn-board circuitry protects the Club A754 from shorts, high-temperature, overvoltage and undervoltage. An LED indicator is provided to let you know when one of these conditions exists.Preamp OutputsUsing multiple amplifiers, the Club A754 has full range preamp outputs allowing you to feed an additional amplifier without using splitters.Class H amp technologyThe JBL Club A754 4 channels subwoofer amplifier delivers 400-Watts RMS using a Class H amplifier design to ensure high output and minimum current draw.Turn-on modeThis switch changes DC to REM to adapt with low-level signals or high-level signals, this is especially helpful as part of remote turn-on lead of your installation more choice. A selectable “Turn-on mode” can protect battery to avoid current drain, when you don’t expect to turn on your amplifier.Technical specifications:4 channel car amplifier75 watts RMS x 4 at 4 ohms(100 watts RMS x 4 at 2 ohms)200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)Variable high- and low-pass filters(32–320Hz, 12dB/octave) on front andrear channelsPreamp and speaker-level inputsPreamp outputsFuse rating: 30A x 28-gauge power and ground leads recommended – wiring and hardware not included with amplifierW x H x D = 320mm x 51.3mm x 180mmW x H x D = 12-5/8'' x 2-1/16'' x 7-1/8''What's in the boxOne Club A754 four channel amplifier4 Bare wire-to-RCA adaptersFour 30A ATO fuses (2 installed, 2 spare)Two JBL stickersOwner’s Manual4 Mounting screws (M4 x 53mm)1 logo badage

JBL Club Gen3 34F 3.5'' (8.7cm) Speaker Set Coaxial 8.7 CM Speaker 2-way75 WATTPro Car Audio by JBL.Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3'', 4'', 5-1/4'', 6-1/2'', 6''x 8'', 4''x6'', 6''x9'', and 3/4'' — they’re the perfect upgrade from factory speakers.Power Handling: 25W RMS, 75W peakSensitivity (@ 2.83V/m): 89dBFrequency Response: 90Hz – 20kHzNominal Impedance: 3.0 ohms

JBL Club Gen3 44F 4.0'' (10cm) Speaker Set Coaxial 10CM speaker 2-way105 WattPro Car Audio by JBL.Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes — 3'', 4'', 5-1/4'', 6-1/2'', 6''x 8'', 4''x6'', 6''x9'', and 3/4'' — they’re the perfect upgrade from factory speakers.4'' (100mm) Two-Way Car SpeakerPower Handling: 35W RMS, 105W peakSensitivity (@ 2.83V): 90dBFrequency Response: 75Hz – 20kHzNominal Impedance: 3.0 ohms

JBL Club Gen3 54F 5.25'' (13cm) Speaker Set Coaxial 13CM speaker 2-way135 WattPro Car Audio by JBL.Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes — 3'', 4'', 5-1/4'', 6-1/2'', 6''x8'', 4''x6'', 6''x9'', and 3/4'' — they’re the perfect upgrade from factory speakers.5-1/4'' (130mm) Two-Way Car SpeakerPower Handling: 45W RMS, 135W peakSensitivity (@ 2.83V): 91dBFrequency Response: 75Hz – 20kHzNominal Impedance: 3.0 ohms

JBL Club Gen3 64 6.5'' (16cm) Speaker Set Coaxial 16CM speaker 2-way180 WattPro Car Audio by JBL.Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes — 3'', 4'', 5-1/4'', 6-1/2'', 6''x8'', 4''x6'', 6''x9'', and 3/4'' — they’re the perfect upgrade from factory speakers.6-1/2'' (160mm) Two-way Car Speaker, Engineered for Better Sound PerformancePower Handling: 60W RMS, 180W peakSensitivity (@ 2.83V): 93dBFrequency Response: 48Hz – 21kHzNominal Impedance: 3.0 ohms

JBL Club Gen3 644F 4x6'' (10x15cm) Speaker Set Coaxial 4x6'' Inch 2-way120 WattPro Car Audio by JBL.Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes — 3'', 4'', 5-1/4'', 6-1/2'', 6''x8'', 4''x6'', 6''x9'', and 3/4'' — they’re the perfect upgrade from factory speakers4''x6'' (100mm x 152mm) Two-Way Car SpeakerPower Handling: 40W RMS, 120W peakSensitivity (@ 2.83V): 92dBFrequency Response: 75Hz – 20kHzNominal Impedance: 3.0 ohms