With the Gecko Plush Drying Towel, you get a high-quality, extra-large, and exceptionally durable drying towel that excels in its ability to dry the car streak-free, lint-free and scratch-free. The drying towel features special loops at the ends, which ensure that lint has no chance. Thanks to its thick and high-quality materials, this drying cloth is capable of extremely efficient moisture absorption. Applications The Gecko plush drying towel is mainly used for streak-free, lint-free and scratch-free drying of windows, mirrors, doors and paintwork of the car. Instructions for use After thoroughly washing the car with the Gecko 2in1 Wash & Wax, dry the car with the Gecko plush drying towel for a streak-free final result. For effective use of the drying towel, use the soft side of the towel. Gently rub or agitate it over the wet surface. You will immediately notice that the surface is left almost dry and streak-free. Once the cloth becomes saturated, you can easily wring it out for further application. Tip: It is recommended to wash the cloth before first use to optimise its absorbency. Place the cloth in the washing machine at a temperature of 40 degrees Celsius and avoid using fabric softener. This will make it easier for the cloth to absorb water in subsequent applications.

The Gecko Polishing Ball offers the solution for perfect polishing of even the most difficult-to-reach surfaces. With its unique structure, the polishing ball delivers a professional finish with impressive results. Designed for use on chrome, aluminium, stainless steel and alloy rims, this unique ball-shaped polishing tool delivers outstanding results and a brilliant high-gloss finish. Not only rims, but also perfect for treating hard-to-reach areas such as grills, exhausts, headlights, alloys and bumpers. Applications This versatile polishing ball is ideal for polishing hard-to-reach areas, including rims, grills, exhausts, headlights, alloys and bumpers. any type of drill. Instructions for use Attach the Gecko Polishing Ball to the drill. Apply a suitable polishing compound to the ball. Turn on the drill and gently bring the ball into contact with the surface to be polished. Move the ball evenly over the surface with light pressure. Check the result regularly and repeat if necessary until the desired gloss level is reached. Rinse the Gecko Polishing Ball with warm water after use and store it in a dry place.

A special polishing cone for polishing hard-to-reach areas such as handles, exhausts, rims, bumpers, door rebates, mirror caps and spoilers. Use the polishing cone in combination with a fine polishing compound to remove light scratches. This special polishing cone allows you to reach and polish even the smallest surfaces, ensuring a professional finish. Applications For polishing hard-to-reach areas such as handles, exhausts, rims, bumpers, door rebates, mirror caps and spoilers. any type of drill. Instructions for use Attach the Gecko Polishing Cone to the drill, apply polishing compound, switch on, polish gently with light pressure, check and repeat if necessary. After use, rinse with warm water and store in a dry place.

This set contains three 150 mm polishing pads in different colours, each intended for coarse, medium and fine polishing. They fit on a 125 mm backing plate. The set includes pads in black (soft), orange (medium) and yellow (hard). These special pads have a central hole for cooling, as well as for vibration and heat dissipation. They are both eccentric and rotary polishers. The Gecko polishing pads are various polishing pastes. Generally, the hard pads are used with coarse polishing pastes, while the fine pads go together with finer polishing pastes. They have a long service life and ensure professional results for your polishing work. Applications: Excellent for removing scratches and swirls on car paintwork, as well as for repairing weathered paintwork and improving gloss. Instructions for use: Make sure the surface you are going to polish is clean and dry. Choose the right polishing pads and polishing paste for the task. Attach the pad firmly to the backing plate of your polisher. Apply a small amount of polishing paste to the pad. Spread the polishing paste evenly over the surface you want to polish. Switch on the polisher and start polishing at low speed. Work in sections and apply more polishing paste if necessary. Check the result regularly and repeat the process if necessary. Clean the polishing pads thoroughly after use and store them in a dry place for future use.

This set consists of three polishing pads with a diameter of 80 mm, each coloured to distinguish between coarse, medium and fine polishing. These pads are designed to be used with a 75 mm backing plate. The pads come in black (soft), orange (medium) and yellow (hard). The Gecko polishing pads are different types of polishing pastes. Generally, the hard pads are used with coarser polishes, while the finer pads work better with more refined polishes. They have a long life and guarantee a professional end result in any polishing task, especially on difficult surfaces such as headlights and other small areas. Applications: Ideal for eliminating minor scratches, holograms and swirls on car paintwork, restoring weathered paintwork and improving the overall gloss of the surface. Directions for use: Start with a clean and dry surface ready for polishing. Choose the right polishing pads and polishing paste the job you want to do. Attach the pad firmly to the backing plate of your polisher. Apply a small amount of polishing paste to the pad and spread it evenly over the surface to be treated. Turn the polisher on to low speed and start polishing. Work in sections and add more polishing compound if necessary. Check the result regularly and repeat the process if necessary. After use, clean the polishing pads thoroughly and store them in a dry place for future use.

This set contains three 150 mm polishing pads in different colours, each intended for coarse, medium and fine polishing. They fit on a 125 mm backing plate. The set includes pads in black (soft), orange (medium) and yellow (hard) colours. What sets these pads apart is their special waffle pattern, carefully designed to improve heat dissipation. This not only ensures a smooth polishing experience, but also increases ease of use. They are compatible with both eccentric and rotary polishers. The Gecko polishing pads can be used with different types of polishes. Generally, the harder pads are used with coarser polishes, while the softer pads are used with finer polishes. They are durable and consistently deliver professional results on every polishing job. Applications: Excellent for removing scratches and swirls on car paintwork, as well as for repairing weathered paintwork and improving gloss. Instructions for use: Make sure the surface you are going to polish is clean and dry. Choose the right polishing pads and polishing paste for the task. Attach the pad firmly to the backing plate of your polisher. Apply a small amount of polishing paste to the pad. Spread the polishing paste evenly over the surface you want to polish. Switch on the polisher and start polishing at low speed. Work in sections and apply more polishing paste if necessary. Check the result regularly and repeat the process if necessary. Clean the polishing pads thoroughly after use and store them in a dry place for future use.

Gecko Power Clean is a powerful, water-soluble and safe cleaning product. It is alkaline and biodegradable and the fast and efficient removal of grease, carbon, oil, fire damage, soot, nicotine deposits and other contaminants in numerous applications. This product does not affect the operation of oil separators. Gecko Power Clean is low foaming, colourless and unscented. Applications: - cleaning painted and unpainted objects, floors, machines, cranes, machine parts and precision parts in any industry, such as garages, tankers, pumping stations, bakeries, food industry, etc. - suction-scrubbing machines (observe mixing ratios 1:10-1:20) - Special application: for cleaning deck covers, diesel oil stains, rubber blankets and as a replacement for ammonia. - Do not spray on windows, mirrors and glasses. - Store in a frost-free place. Dosage: Normal soiling: 1:20 For cleaning doors, furniture, blinds, stainless steel, plastics, tiles, stains on textiles, washbasins, showers, floors, paving, etc. Heavy soiling: 1:10 For degreasing heavily soiled parts, machines, cranes, machine parts, container, forklift, trailers, petrol station, concrete or rubber tiles, ship deck, dustbins, toilets and removal of rubber stripes, old wax layers, stubborn fruit stains, etc. Extreme soiling: 1:1 The best result is obtained if the Gecko Power-Clean 1:1 solution is sprayed on the surface to be cleaned, removed immediately with a damp cloth and then hosed off with a high-pressure cleaner. Label contains information in 4 languages: NL, DU, FR, UK

Gecko Power Clean is a powerful, water-soluble and safe cleaning product. It is alkaline and biodegradable and the fast and efficient removal of grease, carbon, oil, fire damage, soot, nicotine deposits and other contaminants in numerous applications. This product does not affect the operation of oil separators. Gecko Power Clean is low foaming, colourless and unscented. Applications: - cleaning painted and unpainted objects, floors, machines, cranes, machine parts and precision parts in any industry, such as garages, tankers, pumping stations, bakeries, food industry, etc. - suction-scrubbing machines (observe mixing ratios 1:10-1:20) - Special application: for cleaning deck covers, diesel oil stains, rubber blankets and as a replacement for ammonia. - Do not spray on windows, mirrors and glasses. - Store in a frost-free place. Dosage: Normal soiling: 1:20 For cleaning doors, furniture, blinds, stainless steel, plastics, tiles, stains on textiles, washbasins, showers, floors, paving, etc. Heavy soiling: 1:10 For degreasing heavily soiled parts, machines, cranes, machine parts, container, forklift, trailers, petrol station, concrete or rubber tiles, ship deck, dustbins, toilets and removal of rubber stripes, old wax layers, stubborn fruit stains, etc. Extreme soiling: 1:1 The best result is obtained if the Gecko Power-Clean 1:1 solution is sprayed on the surface to be cleaned, removed immediately with a damp cloth and then hosed off with a high-pressure cleaner. Label contains information in 4 languages: NL, DU, FR, UK

Gecko Pre Wash Power Cleaner is a powerful, alkaline cleaner specially developed for removing stubborn dirt on your car. This high-quality product effortlessly removes sand, brine, greasy deposits, insects, bird droppings, environmental contaminants and dirt on car paint and rims. The unique composition of Gecko Pre Wash Power Cleaner works quickly, thoroughly and safely. This powerful alkaline agent penetrates deep into the dirt, allowing it to be easily rinsed away without leaving any residue. The Pre-Wash is carefully and optimally formulated for perfect cleaning, without affecting the existing wax, sealant or any coating. This results in a smooth, clean surface ready for further cleaning. Applications Gecko Pre-Wash is cars, trucks and other vehicles or surfaces. Ideal for preparing your vehicle for a thorough wash. It removes surface dirt and contaminants that may otherwise cause scratches during washing. Instructions for use Use in combination with the Gecko pump sprayer. Spray undiluted on the surface, leave for 1-2 minutes and rinse with water. Dilute 1:20 for perfect results.

The Gecko Premium Detail Drying Towel is a double-sided cloth with ultra soft fibres, specially designed for polishing out waxes and detailing sprays. With its high absorbency, this cloth is also excellent as a drying towel. Moreover, it is safe to use on any material without leaving scratches on surfaces. Applications: Perfect for polishing out waxes and detailing sprays. Thanks to its high absorbency, ideal for quick and effective drying of cars, motorbikes and other vehicles. Also use on various surfaces, including glass, plastic, and painted surfaces. Safe for use on boats and in the home. Instructions for use: Rinse or wash the vehicle with car shampoo, then rinse with clean water. Use the Gecko Premium Drying Towel as a drying towel by gently dabbing the surface for a streak-free finish. Then apply detailing spray or spread wax evenly and buff out with the Gecko Premium Drying Towel for optimal results thanks to its ultra-soft fibres. To keep the towel in top condition, wash regularly with a mild detergent and without fabric softeners.

The Gecko Pro Compound Step 2 is a medium-cut polish specially developed for the second step in the paint correction process. This high-quality compound removes sanding scratches (P1200-P3000), car wash scratches, polishing marks and paintwork imperfections left behind after the coarser polishing with the Gecko Pro Super Cut (Step 1). Ideal for refining the paintwork and restoring an even, deep shine. Thanks to its balanced formula, Gecko Pro Compound ensures a smooth and glossy surface without dust formation or micro-scratches. Use this product in combination with the Gecko Medium Polishing Pad for the best results. Please note: This compound does not yet provide definitive protection. For an optimal finish and paint sealing, we recommend finishing with the Gecko Pro Wax Guard (item number 687692). Application & Use The Gecko Pro Compound has been developed for professional use in the second stage of the polishing process. all paint types, including sensitive or dark paints where a perfect finish is essential. View the complete Gecko Pro-Line range for a full multi-step paint treatment. Instructions for Use Use the Gecko polisher with the Gecko Light Cutting pad and a sufficient amount of product. Shake well before use and remove any irregularities beforehand using suitable sandpaper if necessary. 1. Preparation: Ensure the paintwork is clean and dry. For best results, start with Gecko Pro Super Cut (Step 1) to remove deeper defects. 2. Application: Apply a small amount of compound to the Gecko Light Cutting Pad. 3. Spreading: Spread the product evenly over the surface to be treated at low speed. 4. Polishing: Increase the speed to 1500–2000 rpm and work in overlapping sections of approximately 1 m². Repeat if necessary for a deeper shine. 5. Wiping: Remove excess product with a clean Gecko Microfibre Cloth from the 5-pack (item no. 687853). 6. After-treatment: Finish with Gecko Pro Wax Finish & Protect (item no. 687692) for protection and long-lasting shine. If necessary, you can first proceed with Gecko Pro Fine Finish (Step 3) for further finishing. Tip from the professional Let the Gecko Pro Compound do its work. Work in gentle, overlapping strokes and maintain even pressure. The Gecko Pro Compound is designed so that the abrasive particles break down gradually during polishing. So give the product time to work fully — you’ll notice it becoming increasingly transparent. Only then will you get the most out of this polishing step. Stopping too soon often means you’ll have to start again later.

Professional paint correction for detailers, garages and other car detailing companies. - Removes sanding marks and holograms from step 1 - Refines the paintwork and restores shine - Perfect in combination with our Gecko Polisher (item no. 687812) The Gecko Pro Compound Step 2 is a medium-cut polishing compound specially developed for the second step in the paint correction process. This high-quality compound removes sanding scratches (P1200-P3000), car wash scratches, polishing marks and paint imperfections left behind after coarse polishing with the Gecko Pro Super Cut (Step 1). Ideal for refining the paintwork and restoring an even, deep shine. Thanks to its balanced formula, Gecko Pro Compound ensures a smooth and shiny surface without dust formation or micro-scratches. Use this product in combination with the Gecko Medium Polishing Pad for the best results. Please note: This compound does not provide definitive protection. For an optimal finish and paint seal, we recommend finishing with Gecko Pro Wax Guard (item number 687692). Application & Use The Gecko Pro Compound has been developed for professional use in the second phase of the polishing process. all paint types, including sensitive or dark paints where a perfect finish is essential. View the complete Gecko Pro-Line range for a complete multi-step paint treatment. Instructions Use the Gecko polishing machine with the Gecko Light Cutting Pad and sufficient product. Shake well before use and remove any irregularities with suitable sandpaper. 1. Preparation: Make sure the paintwork is clean and dry. For best results, start with Gecko Pro Super Cut (Step 1) to remove deeper defects. 2. Application: Apply a small amount of compound to the Gecko Light Cutting Pad. 3. Distribution: Distribute the product evenly over the surface to be treated at low speed. 4. Polishing: Increase the speed to 1500 - 2000 rpm and work in overlapping strokes of approximately 1 m². Repeat if necessary for a deeper shine. 5. Wiping: Remove excess product with a clean Gecko Microfibre Cloth from the 5-pack (item no. 687853). 6. After-treatment: Finish with Gecko Pro Wax Finish & Protect (item no. 687692) for protection and long-lasting shine. If necessary, you can first continue with Gecko Pro Fine Finish (Step 3) for further finishing. Tip from the professional Allow the Gecko Pro Compound to do its work. Work in calm, overlapping strokes and maintain even pressure. Gecko Pro Compound is designed so that the abrasive particles gradually break down during polishing. So give the product time to work in fully — you will notice that it becomes increasingly transparent. Only then will you get the most out of this polishing step. Stopping too soon often means you have to start all over again later.

Professional paint correction for detailers, garages and other car detailing companies. - Removes sanding marks and holograms from step 1 - Refines the paintwork and restores shine - Perfect in combination with our Gecko Polisher (item no. 687812) The Gecko Pro Compound Step 2 is a medium-cut polishing compound specially developed for the second step in the paint correction process. This high-quality compound removes sanding scratches (P1200-P3000), car wash scratches, polishing marks and paint imperfections left behind after coarse polishing with the Gecko Pro Super Cut (Step 1). Ideal for refining the paintwork and restoring an even, deep shine. Thanks to its balanced formula, Gecko Pro Compound ensures a smooth and shiny surface without dust formation or micro-scratches. Use this product in combination with the Gecko Medium Polishing Pad for the best results. Please note: This compound does not provide definitive protection. For an optimal finish and paint seal, we recommend finishing with Gecko Pro Wax Guard (item number 687692). Application & Use The Gecko Pro Compound has been developed for professional use in the second phase of the polishing process. all paint types, including sensitive or dark paints where a perfect finish is essential. View the complete Gecko Pro-Line range for a complete multi-step paint treatment. Instructions Use the Gecko polishing machine with the Gecko Light Cutting Pad and sufficient product. Shake well before use and remove any irregularities with suitable sandpaper. 1. Preparation: Make sure the paintwork is clean and dry. For best results, start with Gecko Pro Super Cut (Step 1) to remove deeper defects. 2. Application: Apply a small amount of compound to the Gecko Light Cutting Pad. 3. Distribution: Distribute the product evenly over the surface to be treated at low speed. 4. Polishing: Increase the speed to 1500 - 2000 rpm and work in overlapping strokes of approximately 1 m². Repeat if necessary for a deeper shine. 5. Wiping: Remove excess product with a clean Gecko Microfibre Cloth from the 5-pack (item no. 687853). 6. After-treatment: Finish with Gecko Pro Wax Finish & Protect (item no. 687692) for protection and long-lasting shine. If necessary, you can first continue with Gecko Pro Fine Finish (Step 3) for further finishing. Tip from the professional Allow the Gecko Pro Compound to do its work. Work in calm, overlapping strokes and maintain even pressure. Gecko Pro Compound is designed so that the abrasive particles gradually break down during polishing. So give the product time to work in fully — you will notice that it becomes increasingly transparent. Only then will you get the most out of this polishing step. Stopping too soon often means you have to start all over again later.

Professional paint correction for detailers, garages and other car detailing companies. - Removes micro-scratches and holograms - Restores deep shine and colour intensity - Ideal in combination with the Gecko Soft Finishing Pad. The Gecko Pro Fine Finish Step 3 is an ultra-fine polishing paste specially developed for the final step in the polishing process. This finishing paste effortlessly removes fine micro-scratches (P3000 or finer), light haze and holograms left behind after the previous polishing stages. The Gecko Pro Fine Finish is easy to apply and works exactly as you want it to – even on difficult, sensitive or dark paints. The formula produces hardly any dust and is easy to work with. Perfect for detailers and garages who want top quality without the hassle. Use this product together with the Gecko Soft Finishing Pad for a super smooth, shiny finish. Please note: The Fine Finish does not provide long-lasting protection. To seal the paintwork and ensure a lasting shine, always finish with Gecko Pro Wax Guard (item number 687692). Application & Use The Gecko Pro Fine Finish is designed for professional use as the final step in the polishing process. all paint types, especially vehicles where the appearance must be finished to perfection. Indispensable for preparing vehicles for delivery or for high-end detailing projects. Instructions 1. Preparation: Clean the paint thoroughly and remove any residue from previous polishes with a degreaser. Make sure the paint is cool and dry. 2. Application: Apply a small amount to the Gecko Soft Finishing Pad. 3. Distribution: Spread the product over the surface at low speed. 4. Polishing: Increase the speed to 1000 - 1800 rpm and work in slow, overlapping strokes until the product becomes almost transparent. 5. Removal: Remove product residue with a clean Gecko Microfibre Cloth from the 5-pack (item no. 687853). 6. Aftercare: Always finish with a protective product such as Gecko Wax Guard (item no. 687692) or Gecko Pro Wax Finish & Protect (item no. 687692) for a long-lasting, water-repellent paint seal. Pro tip Always pay attention to the temperature of the paint. For a smooth, hologram-free finish, it is best to work on a cool surface (between 15–25°C). If the paintwork is too warm, the fine finish will evaporate too quickly and break down less effectively. It is therefore best to work in the shade or in a well-ventilated area. You will see the difference immediately in the depth and clarity of the shine.

Professional paint correction for detailers, garages and other car detailing companies. - Removes micro-scratches and holograms - Restores deep shine and colour intensity - Ideal in combination with the Gecko Soft Finishing Pad. The Gecko Pro Fine Finish Step 3 is an ultra-fine polishing paste specially developed for the final step in the polishing process. This finishing paste effortlessly removes fine micro-scratches (P3000 or finer), light haze and holograms left behind after the previous polishing stages. The Gecko Pro Fine Finish is easy to apply and works exactly as you want it to – even on difficult, sensitive or dark paints. The formula produces hardly any dust and is easy to work with. Perfect for detailers and garages who want top quality without the hassle. Use this product together with the Gecko Soft Finishing Pad for a super smooth, shiny finish. Please note: The Fine Finish does not provide long-lasting protection. To seal the paintwork and ensure a lasting shine, always finish with Gecko Pro Wax Guard (item number 687692). Application & Use The Gecko Pro Fine Finish is designed for professional use as the final step in the polishing process. all paint types, especially vehicles where the appearance must be finished to perfection. Indispensable for preparing vehicles for delivery or for high-end detailing projects. Instructions 1. Preparation: Clean the paint thoroughly and remove any residue from previous polishes with a degreaser. Make sure the paint is cool and dry. 2. Application: Apply a small amount to the Gecko Soft Finishing Pad. 3. Distribution: Spread the product over the surface at low speed. 4. Polishing: Increase the speed to 1000 - 1800 rpm and work in slow, overlapping strokes until the product becomes almost transparent. 5. Removal: Remove product residue with a clean Gecko Microfibre Cloth from the 5-pack (item no. 687853). 6. Aftercare: Always finish with a protective product such as Gecko Wax Guard (item no. 687692) or Gecko Pro Wax Finish & Protect (item no. 687692) for a long-lasting, water-repellent paint seal. Pro tip Always pay attention to the temperature of the paint. For a smooth, hologram-free finish, it is best to work on a cool surface (between 15–25°C). If the paintwork is too warm, the fine finish will evaporate too quickly and break down less effectively. It is therefore best to work in the shade or in a well-ventilated area. You will see the difference immediately in the depth and clarity of the shine.

Gecko Pro Fine Finish Step 3 is an ultra-fine polishing compound specially developed for the final stage of the polishing process. This finishing compound effortlessly removes fine micro-scratches (P3000 or finer), light haze and holograms left behind after the previous polishing stages. The Gecko Pro Fine Finish is easy to work with and performs exactly as you want it to – even on tricky, delicate or dark paintwork. The formula produces hardly any dust and works smoothly. Perfect for detailers and garages aiming for top quality without the hassle. Use this product together with the Gecko Soft Finishing Pad for a super-smooth, glossy finish. Please note: The Fine Finish does not offer long-term protection. To seal the paintwork and ensure a lasting shine, always finish with Gecko Pro Wax Guard (item number 687692). Application & Use Gecko Pro Fine Finish is designed for professional use as the final step in the polishing process. all paint types, particularly vehicles where the finish must be perfected. Indispensable when preparing vehicles for delivery or for high-end detailing projects. Instructions for use 1. Preparation: Clean the paintwork thoroughly and remove any residue from previous polishing compounds using a degreaser. Ensure the paintwork is cool and dry. 2. Application: Apply a small amount to the Gecko Soft Finishing Pad. 3. Spreading: Spread the product over the surface at low speed. 4. Polishing: Increase the speed to 1000–1800 rpm and work in slow, overlapping strokes until the product becomes almost transparent. 5. Wiping: Remove any product residue with a clean Gecko Microfibre Cloth from the 5-pack (item no. 687853). 6. After-treatment: Always finish with a protective product such as Gecko Wax Guard (item no. 687692) or Gecko Pro Wax Finish & Protect (item no. 687692) for a long-lasting, water-repellent paint sealant. Tip from the professional Always pay attention to the temperature of the paintwork. For a smooth, hologram-free finish, it is best to work on a cool surface (between 15–25°C). If the paint is too warm, the fine finish will evaporate too quickly and will not set properly. You should therefore work in the shade or in a well-ventilated workspace. You will immediately see the difference in the depth and clarity of the shine.